Audio Technica AT2010 Handheld Condenser Microphone

Free Next Day delivery
on all orders over £99*

Customer Satisfaction
Read independent reviews

0% Finance Available
on all orders over £399*

Home /
Audio Technica AT2010 Handheld Condenser Microphone

Audio Technica AT2010 Handheld Condenser Microphone

UK
The Audio Technica AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage, for crystal-clear vocal performances.
Main Features
- Extended frequency response and superior transient response for smooth, natural sonic characteristics
- High SPL-handling and wide dynamic range provide unmatched versatility
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Rugged, all-metal and construction for years of trouble-free service
- Quiet-Flex stand clamp provides silent, flexible microphone positioning
Read More

Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.
Audio Technica AT2010 Specifications
Element: Fixed-charge back plate permanently polarised condenser
Polar Pattern: Cardioid
Frequency Response: 40-20,000 Hz
Open Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 113 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 71 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 48V DC, 2 mA typical
Weight: 233 g / 8.2 oz
Dimensions: 179.1 mm / 7.05 inch long, 50.8 mm / 2.00 inch maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8470 Quiet-Flex stand clamp for 5/8 inch-27 threaded stands, 5/8 inch-27 to 3/8 inch-16 threaded adapter, soft protective pouch
This product will be ordered in from our suppliers as required. Please contact us for availability.
This item is normally sent to Mainland UK addresses by DPD who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.
Mainland UK: £3.50 within mainland UK ( Orders over £99 are delivered FREE )
UK Non-Mainland: £ 12
Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout).
Order this item before 4pm and receive it on the next working day, mainland UK only*
4 Recommended Accessories

SE Electronics RF-X Reflexion Filter X
@ £89.00
Product Code: Product Details
Quantity:

SE Electronics Metal Pop shield with gooseneck
@ £25.00
Product Code: Product Details
Quantity:

ART Tube MP Studio V3
@ £88.79
Product Code: Product Details
Quantity:

Ultimate JamStands JS-MCFB100 Tripod Mic Stand w.Fixed Boom
@ £25.73
Product Code: Product Details
Quantity:

Additional Information

Brand	Audiotechnica
Condition	New
Specifications	Element: Fixed-charge back plate permanently polarised condenser Polar Pattern: Cardioid Frequency Response: 40-20,000 Hz Open Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 Pa Impedance: 100 ohms Maximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 113 dB, 1 kHz at Max SPL Signal to Noise Ratio: 71 dB, 1 kHz at 1 Pa Phantom Power Requiremens: 48V DC, 2 mA typical Weight: 233 g / 8.2 oz Dimensions: 179.1 mm / 7.05 inch long, 50.8 mm / 2.00 inch maximum body diameter Output Connector: Integral 3-pin XLRM-type Accessories: AT8470 Quiet-Flex stand clamp for 5/8 inch-27 threaded stands, 5/8 inch-27 to 3/8 inch-16 threaded adapter, soft protective pouch