Audio Technica AT4041 condenser microphone (Cardioid)
The Audio Technica AT4041 is a premium electret condenser microphone engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound.
- Smooth, extended frequency response with a slight rise occurring in the high-frequency region
- Ideal for drum overheads, acoustic guitar, piano, horns and under snare
- Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable hi-pass filter and rugged turned-brass microphone housing
- Custom shock mount provides superior isolation
- Read More
The Audio Technica AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the Audio Technica AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilisation. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.
Audio Technica AT4041 SPECIFICATIONS
Element: Fixed-Charge Back Plate, Permanently Polarised Condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll-Off: 80 Hz, 12 Db/Octave
Open Circuit Sensitivity: -36 Db (15.8 Mv), Re 1v At 1 Pa
Impedance: 100 Ohms
Maximum Input Sound Level: 145 Db Spl, 1 Khz At 1% T.H.D.
Dynamic Range (Typical): 121 Db, 1 Khz At Max Spl
Signal-To-Noise Ratio: 70 Db, 1 Khz At 1 Pa
Phantom Power Requirements: 48v Dc, 3.2 Ma Typical
Switch: Flat, Roll-Off
Weight: 120 g / 4.2 Oz
Dimensions: 159.5 mm / 6.28-Inch Long, 21 mm / 0.83-Inch Body Diameter
Output Connector: Integral 3-Pin Xlrm-Type
Included Accessories: At8405a Stand Clamp For 5/8-Inch -27 Threaded Stands: At8159 Windscreen: Protective Carrying Case
Audio-Technica Case Style - S1
- This product will be ordered in from our suppliers as required. Please contact us for availability.
This item is normally sent to Mainland UK addresses by DPD who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.
FREE delivery within mainland UK
UK Non-Mainland: £ 12
Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout). Please see our international delivery page or contact us for details.
6 Recommended Accessories
Brand Audiotechnica Condition New Specifications
ELEMENT - Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN - Cardioid
FREQUENCY RESPONSE - 20-20,000 Hz
LOW FREQUENCY ROLL-OFF - 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY - -36 dB (15.8 mV), re 1V at 1 Pa
IMPEDANCE - 100 ohms
MAXIMUM INPUT SOUND LEVEL - 145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (TYPICAL) - 121 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO - 70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS - 48V DC, 3.2 mA typical
SWITCH - Flat, roll-off
WEIGHT - 4.2 oz (120 g)
DIMENSIONS - 6.28-inch (159.5 mm) long, 0.83-inch (21.0 mm) body diameter
OUTPUT CONNECTOR - Integral 3-pin XLRM-type
ACCESSORIES FURNISHED - AT8405a stand clamp for 5/8-inch -27 threaded stands: AT8159 windscreen: protective carrying case
AUDIO-TECHNICA CASE STYLE - S1
Other products to consider
Audio Technica AT4041 condenser mic (Cardioid) (As New) Add to compare Ordered on Request*
Audio Technica AT2050 Multi Pattern Condenser Microphone Add to compare£229.00Ordered on Request*
Audio Technica AT4040SM Condenser Microphone (includes suspension) Add to compare£369.00Ordered on Request*
|This product has no reviews yet.|