Presonus Temblor T10 Active Studio Subwoofer
The Presonus Temblor T10 is a versatile and powerful active studio subwoofer that perfectly complements any monitoring setup.
- Active studio subwoofer with 10 inch driver
- 250 watt, Class AB amplification
- Balanced and unbalanced I/O
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Switchable highpass filter
- Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
- Polarity invert and ground-lift switch
- Read More
The Bottom Line Is Great Sound
To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The Presonus Temblor™ T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
An ideal companion to Eris™ and Sceptre™ active reference monitors, the T10 complements full-range monitors without overshadowing them, extending the reach of your full-range system's low end with a musical and natural approach.
Powerful and musical, Temblor features high-quality components and design that enable it to deliver fast and accurate transient response, extending low frequencies without a hint of 'tubbiness' or overshoot.
The Temblor T10 is an active subwoofer with a 10-inch glass-composite driver, built-in crossover, high-temperature voice coil, and damped rubber surround. Its cabinet features a front-firing, bass-reflex acoustic port and optimised, resonance-suppressing internal bracing. The enclosure has integrated rubber feet for stable placement.
In addition to outstanding accuracy and a frequency response that ranges from 20 Hz to 130 Hz, this combination of features enables the subwoofer to produce higher volume—up to 113 dB SPL—with less power than a sealed-box design. But make no mistake, the T10 has plenty of juice: 250 watts of Class AB power.
The result is a subwoofer that delivers accurate, tight low end and outperforms subs costing far more. With Temblor T10, you hear what the foundation of your mix really sounds like so you can produce your best mix from top to bottom.
Customise Your System Until It's Just Right
The T10 provides more user controls than any other subwoofer in its class, enabling seamless integration into your listening environment.
The Temblor T10's extensive user controls include input gain (-30 dB to +6 dB, continuously variable) and a continuously variable lowpass filter (50 Hz to 130 Hz) that let you create a seamless crossover transition between your full-range studio monitors and subwoofer for a more accurate listening environment.
A switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors, avoiding destructive cancellation and reinforcement in the T10's upper range.
The result is a subwoofer that can be adjusted to perfectly complement not only Sceptre™ CoActual™ and Eris™ active studio monitors but virtually any studio monitor.
The T10 also features a momentary footswitch (included) that bypasses the subwoofer, highpass filter, and Sub Out. This allows your audio source signal to pass directly through the Temblor T10 to the full-range studio monitors, making comparing your mix with or without sub frequencies quick and easy. This helps to ensure your mix will sound good on a wide variety of systems.
Of course, Presonus didn't forget the 'small things' that can make a big difference: polarity invert and a ground-lift switch.
Versatile I/O Works With Any Setup
The Temblor T10 provides a choice of three input pairs: two sets of balanced inputs (XLR and 1/4 inch TRS) and one pair of RCA unbalanced inputs. Pairs of inputs are provided in order to accept a stereo signal from your audio source.
When both of the balanced connections are in use, the TRS inputs will take precedence over the XLR inputs. The RCA inputs will sum into either balanced connection.
You get two pairs of balanced outputs: XLR and 1/4 inch TRS. The full-range signal connected to the stereo inputs on the T10 is passed through to these outputs so you can connect them to your main left and right studio monitors. If the High Pass Filter switch is engaged, frequencies below 80 Hz are not sent from these outputs.
The T10 also has a balanced XLR output that sends the low-frequency signal from the lowpass filter to a second Temblor T10 for the ultimate in smooth low end.
Presonus Temblor T10 Specifications
2- Balanced XLR
2- Balanced 1/4 inch TRS
2- Unbalanced RCA
2- Balanced XLR (full range with 80 Hz HPF option)
2- Balanced 1/4 inch TRS (full range with 80 Hz HPF option)
1- Balanced XLR (Sub Out)
Frequency Response: 20 Hz – 200 Hz
Low Pass Filter Frequency: 50 – 130 Hz (variable)
Signal-to-Noise Ratio: >98 dB
THD: 0.019% @ power <160W
Amplifier Power: 170W RMS
Power Consumption: 230W
Amplifier Type: Class AB
Peak SPL at 1m: 113 dB
Woofer: 10 inch glass-composite
Input Gain Range: -30 to +6 dB
Polarity Switch: 0° or 180°
Low Pass Filter Control: 50 Hz to 130 Hz
Ground Lift Switch: On/Off
High Pass Filter Switch: On/Off
Bypass Footswitch: On/Off
External mains fuse
Dimensions and Weight
Dimensions (W x D x H): 320 x 400 x 400 mm / 12.6 x 15.75 x 15.75 inches
Weight: 19.9 Kgs / 39.46 lbs
- This product is in stock and ready to ship
This item is normally sent to Mainland UK addresses by Interlink who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.
FREE delivery within mainland UK
UK Non-Mainland: £ 12
Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout) International orders over £250 are delivered FREE except for large or heavy items. Please see our international delivery page or contact us for details.
4 Recommended Accessories
Brand Presonus Condition New Power 201-300W Specifications
2- Balanced XLR
2- Balanced 1/4 inch TRS
2- Unbalanced RCA
Other products to consider
|This product has no reviews yet.|