Markbass Little Mark Tube 500W Bass Head

Main Features

• 500W valve bass head
• Extensive and versatile EQ section
• VPF and VLE controls
• 500W Rms @ 4 Ohms / 300W Rms @ 8 Ohms
• Balanced XLR output

The Mark Bass Little Mark Tube gives the warmth and richness of a tube preamp, or the clean attack of a solid state preamp or a mix of both!

On the front panel there are also two inputs with separate gain controls: one 1/4 inch jack, and one combo jack that accepts either an XLR or 1/4 inch cable. Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four bands of equalization, VLE and VPF filters, line out level control, pre-post EQ switch for the XLR out (on rear panel), and mute control (push-pull on the master knob).


Mark Bass Little Mark Tube Specifications

Inputs
Input 1: Impedance 500 Kohm, Max. Voltage 15 Vpp
Input 2: (Balanced XLR/1/4 inch Combo)
Balanced: Impedance 500 Kohm, Max. Voltage 15 Vpp, Phantom Power 48V
Effect Return: Impedance 33 Kohm, Max. Voltage 10 Vpp

Controls
Gain 1: -60 Db To +23 Db Range
Gain 2: -60 Db To +23 Db Range
Mix: Mixes Tube And Solid State Gain
Master Volume
Line Out Level
Ground Lift (Switch On Rear Panel)
Pre/Post Eq (Switch On Rear Panel)
Mute (Push/Pull On Master Knob)

Equalization
Low: Centre Frequency 40 Hz: Level: ±16 Db
Low Mid: Centre Frequency 360 Hz, Level: ±16 Db
High Mid: Centre Frequency 800 Hz, Level: ±16 Db
High: Centre Frequency 10 Khz, Level: ±16 Db
VPF (Variable Pre-Shape Filter) Centre Frequency 380 Hz
VLE (Vintage Loudspeaker Emulator) Frequency Range 250 Hz-20 Khz

Outputs
Line Out: Balanced XLR, Max. Voltage 20 Vpp
Effect Send: Unbalanced, Max. Voltage 20 Vpp (Pre-EQ)
Tuner Out: Unbalanced, Max. Voltage 2 Vpp
Speaker Out: Speakon/1/4 inch Combo, 1/4 inch

Other
Dimensions (W x D x H): 27.6 x 25 x 2.5 cm / 10.87 x 9.84 x 3.27 inches
Weight: 2.3 Kg / 5.07 Lbs
Output Power: 500W Rms @ 4 Ohms / 300W Rms @ 8 Ohms
Power Requirement: 240V - 50/60Hz (Voltage Is Factory Preset According To Region Of Sale)