Marshall DSL40C Guitar Combo Amp (ex-display)

Main Features

• 40W Valve combo
• Two footswitch controlled channels
• Optional power reduction to 10w
• Onboard Reverb effect
• FX Loop
• Speaker emulated output

The Marshall DSL40 has been designed with a 12 inch G-12 v-type speaker for those who need exceptional tone and flexibility.

With rich functionality including the ability to move between two sounds within each gain channel, players can experiment and release their personality through sound.

Stand Out On Stage
The DSL40 has two master volumes for those loud solo moments.

Choose Your Tone
Using the reverb, FX loop, tone shift controls and two footswitchable gain channels you can create a style that suits you and another to release your alter ego.

Vary The Output
The DSL40 has five speaker outputs giving you plenty of flexibility and the ability to record, with a standby function for silent recording as well. It can be taken from the bedroom, to the studio and onto a gig.

Pick Your Environment
Power can be reduced from 40w to 20w without affecting the quality meaning the DSL40 can be used in multiple environments with confidence.

MIDI Compatibility
The amps features can be controlled using any MIDI equipment, so for those technical players you can play this amp and different MIDI equipment at any one time.


Marshall DSL40 Technical Specifications

Model: DSL40
Range: DSL
Technology: Valve
Channels: 2 (Split) 'Ultra gain' and 'classic gain'

Electronics
Output wattage: 40w (with power reduction option to 20w)
Outputs: Speaker outputs: 5 x 1/4 inch jack sockets (16 ohms load / 8 ohms load / 4 ohms load), 1 x 1/4 inch jack emulated line out
Inputs: 1 x 1/4 inch instrument jack, 1 x 3.5mm jack Aux in MIDI in, footswitch
Controls: Classic gain channel (gain, volume, clean crunch switch), ultra gain channel (gain, volume, OD1/OD2 switch), treble, middle, bass, tone shift switch, presence, resonance, reverb (classic gain channel), reverb (ultra gain channel), master select switch, master volume I, master volume II, loop on/off switch, low power option (on rear)
Effects: Reverb
Effects loop: Yes, send/return

Speakers
Speaker configuration: 1x12 inch
Speaker model: Celestion V-Type speaker (16 ohms, 80w)
Unit impedance: 16 ohms

Valves
Pre amp valves: 3 x ECC83
Power amp valves: 1 x ECC83, 2 x EL34

Accessories
Footswitch: PEDL-90012 included
Cable: Detachable power cable included

Dimensions and Weight
Weight: 22.9 Kg
Dimensions (W x H x D): 620 x 490 x 252mm

Please Note: Due to the technical nature of the products advertised on this page it is highly recommended that you contact us by telephone or by coming into our store to discuss your particular requirements and to arrange a demonstration before buying any of these products