TC Electronic Digital Konnekt x32 Digital Signal Interface  (b-stock)

TC Electronic Digital Konnekt x32 Digital Signal Interface (b-stock)

Product code: bsttcedigitalkonnektx32

The TC Electronic Digital Konnekt x32 integrates digital equipment with computer-based recording setups. It features FireWire connection to and from your DAW and allows efficient routing and conversion between multiple digital formats and sample rates, as well as providing extra features such as analogue outputs, scene recall, convenient monitoring and front panel lock.


  • TC Electronic Digital Konnekt x32 Digital Signal Interface (b-stock)

    The TC Electronic Digital Konnekt x32 integrates digital equipment with computer-based recording setups. It features FireWire connection to and from your DAW and allows efficient routing and conversion between multiple digital formats and sample rates, as well as providing extra features such as analogue outputs, scene recall, convenient monitoring and front panel lock.

    Main Features

    • Flexible digital patchbay, format converter and audio interface
    • Seamless DAW integration with Integrator plug-in
    • Unique digital matrix style UI for direct selection of signals
    • 8 ch of sample rate conversion on board for optimal digital adaptation
    • Analogue outputs (unbalanced and balanced line) for monitoring
    • Scene recall enabling instant recall of full setups
    Read More


    Tired of re-wiring over and over again? With Konnekt Digital x32 you connect your digital hardware once, make the wiring that fits your setup requirements and you're good to go. All subsequent routing takes place from the front panel of Digital Konnekt x32.

    Format Converter
    Digital Konnekt x32 provides efficient format conversion between units using ADAT, SPDIF, TOS and AES/EBU digital formats. Any input format can be converted into either of the listed formats and aligned to any sample rate ranging from 44.1 to 96 kHz.

    Firewire Connectivity
    Two FireWire connections enable you to use Konnekt Digital x32 as an audio interface connected to a computer. It streams 16 channels of audio to and from the computer, and is compatible with other TC Electronic audio interfaces.

    Unique digital matrix style UI for direct selection of signals
    Since all functions are assigned individual front panel buttons without underlying sub menus, Digital Konnekt x32 gives an instant overview of routing and offers intuitive and direct monitoring and operation.

    8 ch of sample rate conversion on board for optimal digital adaptation
    In a digital setup without a sample rate converter it is imperative that all units run by the same sample rate. Increasingly more project studios prefer to run their host application at 96 kHz, a sample rate which lots of digital hardware doesn't support. Also, using devices that does not receive a digital signal - keyboards, synthesizers, cd/dvd players etc., is a challenge without sample rate converters. With Digital Konnekt x32 this is no problem. Its sample rate converters allow you to align units running at different sample rates ranging from 44.1 kHz to 96 kHz.

    Analogue outs (unbalanced and balanced line) for monitoring
    Analogue stereo outs allow you to connect a set of monitor speakers. This is perfect when you use it as an audio interface, and together with the phones out, it easily lets you monitor each of the inputs individually.

    Scene recall enabling instant recall of full setups
    The Scene recall function allows you to store up to 4 snapshots of all active routings and settings.

    JET™ technology ensures rock solid digital signal handling
    The TC developed DICE II chip, running Digital Konnekt x32's super stable clock, is based on JET™, Jitter Elimination Technology. With the integrated JET™ technology the DICE II chip is able to align all digital signals from external digital sources with extreme perfection. The great benefit of this is that all supported digital formats will be automatically aligned and thereby you get maximum digital quality through and through.

    Featuring TC's plug-in streaming technology, the Integrator plug-in (VST and AU) facilitates seamless integration of all external units with your recording setup. Once connected, adding the unique sound of your Reverb4000 (or any other digital external hardware unit) is just a mouse click away. And with the built-in latency roundtrip measuring feature and your DAWs latency compensation, your projects will not suffer from latency introduced by the external hardware.

    Digital Konnekt x32: Patchbay, Format Converter, Audio Interface and hardware integrator!

    Integrator plug-in
    The Integrator plug-in (VST and AU) makes integration of external hardware into your DAW environment seamless. It offers a 'plug-in' audio routing representation of your external digital hardware.

    VST and AU
    Since Integrator operates like a normal VST/AU plug-in it can be inserted on any track, as a send effect or on the master output of your host application.

    Multiple devices
    Integrator works with up to four Konnekt audio interfaces at a time, so if you have more interfaces, simply select the one that the external hardware is attached to.

    Easy routing
    To setup the routing of Integrator is as simple as possible. You only have to select the first audio channel: Integrator will then figure out how to route the rest. So, if you for instance have connected your external hardware to the S/PDIF 7+8, simply select S/PDIF 7.

    Calibration
    With the calibrate feature you can measure the latency of the entire signal chain from plug-in input to plug-in output, including the latency of the plug-in, the audio driver, the D/A and A/D converters and the latency of the external hardware you use. You can see the total roundtrip latency, and the host application will automatically compensate for this latency. Integrator has sample accurate latency measurement.

    Test signal
    Integrator is able to generate a test signal to verify that your external hardware is routed correctly. The auto test signal mode will cycle between channels.

    Meters
    Integrator features nice and clear send and return meter sections, and with the level controls you can control the send level and the return level individually.

    Minimum system requirements

    Mac
    OSX 10.4.9 or later
    OS X 10.5 Leopard (with 32bit PPC and Intel kernel)
    OS X 10.6 Snow Leopard (with 32bit and 64bit Intel kernel)
    OS X 10.7 Lion (with 32bit and 64bit Intel kernel)
    PowerPC (1 GHz or faster) or Intel CPU
    512 MB RAM
    FireWire (IEEE 1394) port
    OS X 10.4.9 or later

    Windows
    XP SP2 or Vista x32
    Windows XP / Windows Vista / Windows 7 32 bit
    Windows XP / Windows Vista / Windows 7 64 bit
    Pentium 4, 1.6 GHz or faster
    512 MB RAM
    FireWire (IEEE 1394) port

    These units do not come with original software discs. All software should be downloaded from the TC Electronic website to ensure you have the latest version.

  • Sorry - this product is not available to purchase
  • 1 Recommended Accessory

  • Additional Information

    stock message Currently Unavailable to purchase
    Brand TC Electronic
    Condition Ex-display
    Minimum system requirements - Mac OSX 10.4.9 or later
    OS X 10.5 Leopard (with 32bit PPC and Intel kernel)
    OS X 10.6 Snow Leopard (with 32bit and 64bit Intel kernel)
    OS X 10.7 Lion (with 32bit and 64bit Intel kernel)
    PowerPC (1 GHz or faster) or Intel CPU
    512 MB RAM
    FireWire (IEEE 1394) port
    OS X 10.4.9 or later
    Minimum system requirements - PC XP SP2 or Vista x32
    Windows XP / Windows Vista / Windows 7 32 bit
    Windows XP / Windows Vista / Windows 7 64 bit
    Pentium 4, 1.6 GHz or faster
    512 MB RAM
    FireWire (IEEE 1394) port

FeeFo Reviews

This product has no reviews yet.