Tascam UH-7000 Dual Mic Preamp and USB Audio Interface

Tascam UH-7000 Dual Mic Preamp and USB Audio Interface

Product code: tasuh7000
Feefo reviews:

The Tascam UH-7000 is a 2-channel USB audio interface with 2 mic preamps, burr-brown converters, and DSP mixer and dynamics effects.


  • Tascam UH-7000 Dual Mic Preamp and USB Audio Interface

    The Tascam UH-7000 is a 2-channel USB audio interface with 2 mic preamps, burr-brown converters, and DSP mixer and dynamics effects.

    Main Features

    • HDIA mic preamps: -128dB EIN
    • Burr-Brown PCM4220 AD converter, PCM1795 DA converter
    • Supports 24-bit/192kHz USB transmission and AD/DA conversion
    • DSP mixer can be switched between multitrack and stereo mix modes
    • DSP dynamics effects: compressor, noise suppressor, de-esser, exciter, EQ, limiter/low cut
    • 4-in/4-out audio streaming from a PC connected via USB 2.0
    • Professional output specifications (maximum output level: +24dBu)
    Read More


    High-quality audio and low noise - that's what you get with the Tascam UH-7000. Graced with high-end components and stellar specs, this professional two-channel USB interface gives you high-definition mic preamps and Burr-Brown converters in a rugged, attractive half-rack chassis. The UH-7000 is spec'd with flexible I/O and a host of useful features, including a DSP mixer and dynamics, and the ability to stream four channels of audio to/from your computer. Not only a perfect front end for your DAW, The Tascam UH-7000 also works as a standalone microphone preamp and AD/DA converter.

    With two channels of simultaneous recording capability, the Tascam UH-7000 is perfect for singer/songwriters looking to create their demo or document song ideas. Both channels offer phantom power, so you can use condenser microphones with no problem. In addition to analogue XLR and TRS inputs, the unit also sports digital XLR I/O that supports AES/EBU and SP/DIF. Main analogue outs are XLR. The UH-7000 will even stream four channels of audio to and from your computer via USB. You get low-latency monitoring through the DSP mixer, which can be switched between multitrack and stereo mix modes. The UH-7000 has a headphone output with separate level control, so you can mix, edit, and listen back to your recordings.

    The Tascam UH-7000 employs a High Definition Instrumentation Architecture (HDIA) mic preamp design that delivers pristine audio with vanishingly low noise. For these preamps, Tascam engaged in repeated listening tests in order to ensure the highest performance in both numerical ratings and subjective audio quality. The instrumentation method is quite parts and labor intensive (and therefore rarely used these days in audio equipment design). Boasting a circuit used not only for pro audio gear but also in high-end measurement devices, the UH-7000 can capture the finest expressive nuances of your musical performances.

    For the UH-7000, Tascam paid particular attention to parts selection, as evidenced by the presence of Burr-Brown converters, thin-film metal resistors, a precision TCXO clock generator, and film capacitors for improved noise performance. The analogue audio input circuit was designed with a priority of low noise and maximum audio quality. Key components only made the grade after numerous critical listening tests. The results of this meticulous attention to detail are a solid pro audio product you can feel good about putting to work in your studio.


    Additional features include:

    Thin film metal resistors with outstanding noise performance
    High audio quality film capacitors with low distortion
    Line or digital outputs can be selected using the DSP mixer
    Two balanced analogue XLR jacks for both input and output, two balanced analogue TRS input jacks
    XLR digital I/O jacks support AES3-2003/IEC60958-4 (AES/EBU) and IEC60958-3 (S/PDIF) formats
    +48 volt Phantom power supply
    Standard TRS headphones output jack (45mW/channel output)
    Large INPUT level knobs enable precise adjustment of input levels
    Two 20-segment LED level meters
    Low latency monitoring through the DSP mixer
    DSP effects can be applied to inputs, outputs or the master
    DSP REVERB (hall, room, live, studio, plate) send effect is ideal for record monitoring
    Link line function enables volume control of powered monitors
    Single punch MIXER PANEL button
    Strong, highly durable aluminium body
    Convenient half-rack size, three-pronged inlet power cable
    Support for Mac and Windows operating systems
    Confirmed operation with major DAW software, including Sonar X3, ProTools, Cubase, and Live


    Specifications:

    Sampling frequency: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
    Quantization bit rate: 24bit

    Analog audio inputs:
    ANALOG LINE IN 1/2:
    Connector: 6.3mm(1/4-inch) TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
    Input impedance: 15kohms
    Maximum input level: +26.5dBu
    Minimum input level: -38dBu

    ANALOG MIC IN 1/2:
    Connector: XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED
    Input impedance: 2.2kohms
    Maximum input level: +2dBu
    Minimum input level: -60dBu

    Analog audio outputs:
    ANALOG LINE OUT 1/2:
    Connector: XLR-3-32(1:GND, 2:HOT, 3:COLD), BALANCED
    Output impedance: 100ohms
    Maximum output level: +24dBu

    Digital audio inputs:
    AES/EBU:
    Connector: XLR-3-31(1:GND, 2:HOT, 3:COLD)
    Formats: IEC60958-3 (S/PDIF), IEC60958-4 (AES/EBU)
    Sampling frequencies: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

    Digital audio outputs:
    AES/EBU:
    Connector: XLR-3-32(1:GND, 2:HOT, 3:COLD)
    Formats: IEC60958-3 (S/PDIF), IEC60958-4 (AES/EBU)
    Sampling frequencies: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz

    PHONES:
    Connector: 6.3mm(1/4-inch) stereo phone jack
    Maximum output: 45mW+45mW or more(THD+N 1% or less, 32ohms loaded)

    USB:
    Connector: USB B type 4-pin
    Format: USB 2.0 High Speed (480 Mbps), Full Speed (12 Mbps)

    Power: AC100-240V, 50/60Hz
    Power consumption: 15W
    Dimensions: 214(W) 81.2(H) 233(D)mm
    8.4(W) 3.2(H) 9.2(D)inch
    Weight: 2.2 kg, 4.85 lb
    Operating temperature: 5C to 35C

    Audio performance:
    ADC chip set dynamic range: 123dB (A-weighted)
    DAC chip set dynamic range: 123dB (A-weighted)
    Frequency response: 20Hz to 80kHz +0.005dB/-0.16dB (mic preamp for all sampling frequencies)
    THD: 0.0009% or less(MIC to AD)
    S/N ratio: 117dB (MIC to AD)
    EIN: -128dBu


    Computer system requirements:

    Windows:
    Compatible OS: Windows XP (32-bit SP3 or later), Windows 7 (32/64-bit SP1 or more), Windows 8 (32/64-bit), Windows 8.1 (32/64-bit). Please note that Windows Vista and Windows XP 64-bit are not supported
    Windows-compatible computer with a USB 2.0 port, Dual core/2 GHz CPU or faster (x86), 2 GB RAM or more
    Supported audio drivers: ASIO2.0, WDM(MME)

    Macintosh
    Compatible OS: Mac OS X Snow Leopard (10.6), OS X Lion (10.7), OS X Mountain Lion (10.8), OS X Mavericks (10.9)
    Apple Macintosh computer with a USB 2.0 port, Dual core/2 GHz CPU or faster, 2 GB RAM or more
    Supported audio drivers: Core Audio

  • This product will be ordered in from our suppliers as required. Please contact us for availability.

    This item is normally sent to Mainland UK addresses by Interlink who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.

    FREE delivery within mainland UK

    UK Non-Mainland: £ 12

    Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout) International orders over £250 are delivered FREE except for large or heavy items. Please see our international delivery page or contact us for details.

  • Additional Information

    On demo in store No
    Brand Tascam
    Condition New

FeeFo Reviews

Customer Comment Our Response
Product:
12-Sep-2014
I have not used this yet bought it through a recommendation
Read more reviews on Feefo