Tascam DR-70D 4-Channel Audio Recorder and Accessories Bundle
- Compact, professional-grade audio recorder designed to be used in combination with a DSLR camera
- Two built-in omnidirectional microphones
- Uses an SD/SDHC/SDXC card as recording medium (up to 128 GB)
- Four channels can be mixed down to a stereo signal
- Recording at 44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format)
- Four XLR/TRS combo inputs can provide phantom power (+24V/+48V)
- AK-DR70C Accessory Pack included
Package consists of:
• 1 x Tascam DR-70D 4-Channel Audio Recorder for DSLR Cameras
• 1 x Tascam AK-DR70C Accessory Pack For DR-70D Recorder
Tascam DR-70D 4-Channel Audio Recorder for DSLR Cameras
The Tascam DR-70D is a compact audio recorder that allows the aspiring DSLR user to create audio recordings in very high quality in parallel to their film or video shots.
With its two built-in microphones, the DR-70D is instantly ready for use in standard situations. In addition, it provides four XLR/TRS combo jacks which can be used to record four channels of audio with excellent sound quality using professional microphones. Thanks to a camera output the recorder's stereo signal can be recorded also on the camera to ease subsequent editing of the material in combination with the slate tone function of the recorder. On the other hand you can use the camera input to monitor the audio of the camera using the recorder.
Features of the DR-70D include overload-resistant, great-sounding preamps with switchable low-cut filter and limiter, handling of microphone signals in mid/side format, 24- or 48-volts phantom power for condenser mics, as well as many common and not so common functions that facilitate capturing, monitoring and subsequent processing of the audio tracks.
Two Built-In Microphones
The two omnidirectional microphones allow you to easily record natural stereo sound with just this unit. Used together with small shotgun mics, you can even record audio from people speaking in an interview and the ambient sound at the same time (on different tracks), for example, with a compact set up.
4 XLR/TRS Combo Jacks Allow A Wide Range Of Setups
The four-channel design enables use of two shotgun mics and the stereo mic to record ambience and each speaker individually. Since channels 1 and 2 can be set to the stereo input and channels 3 and 4 can be set to the built-in mic, a large variety of microphone setups is possible.
MONO/DUAL MONO mode: This is best for recording the audio of a single performer.
STEREO/DUAL STEREO mode: This is best for recording with the built-in microphone or a stereo mic.
2MIX/DUAL 2MIX mode: This creates stereo files of the signals of multiple inputs that have been mixed.
Built-In Mixer With 4 Inputs And 2 Outputs
The mixer can take a total of 4 channels from among the four XLR inputs that support phantom power, the stereo mini-jack input and the built-in stereo mic. In addition to adjust pan and input level, this unit also offers a limiter, a five-setting low-cut filter and a delay that can compensate for distances between mics. Moreover, a mid-side decoding function allows the use of two microphones in mid-side configuration.
High Audio Quality Through HDDA Microphone Preamps
Mic preamps, which receive and amplify microphone input signals, have a large impact on the quality of the recorded audio material. The DR-70D uses Tascam original HDDA (High Definition Discrete Architecture) microphone preamps which they created through careful selection of parts. For example, they chose the NE5532 for the operational amplifier, which has a strong effect on audio quality. With a mic amp circuit that uses discrete architecture comprised of meticulously-chosen parts, they have achieved an equivalent input noise of −120 dBu.
The A/D converter that converts analogue signals to digital is made by Cirrus Logic and is equivalent to those used in the successful DR series of linear PCM recorders. Recording at resolutions up to 96 kHz/24 bit is supported.
Compact And Tough Design
The designer of the DR-70D focused on making the unit small so that it does not interfere with camera-work when it is attached to a camera support system or stabiliser. The unit has tripod screw threads on the bottom side and a removable camera attachment screw on its top. A hot shoe mount is also included so you can attach the recorder in the way most convenient for you by placing it between a tripod and the camera or on top of the camera with a hot shoe.
Camera Input And Output
The DR-70D has a camera input jack that can be used to monitor the audio from the DSLR camera. By using this with the DR-70D monitor selection function, you can efficiently monitor the audio from not only the DR-70D but also from the DSLR camera.
The camera output jack is designed to output the mixed audio to the camera so that the same audio can be recorded by the DR-70D and the camera. Since the input level varies by camera maker and there are usually few adjustments related to volume on DSLR cameras, this unit has an output volume dial that can be used to make adjustments.
Slate Tone Generator For Easy Alignment With Video Files
The built-in generator can produce slate tones that can be used as references when aligning audio and video. In addition to being able to produce slate tones when recording starts or when it starts and stops, the SLATE button can be used to add slate tones at any desired point.
Tascam AK-DR70C Accessory Pack For DR-70D Recorder
The Tascam AK-DR70C accessory package is designed to enhance the potential of their DR-70D recorder.
When filming outdoors, even slight breezes can cause mics to pick up wind noise. In order to physically prevent this noise, this package includes a fuzzy windscreen that fits the form of the DR-70D.
Shoe Mount Adapter
The bottom of the adapter can be mounted on a camera accessory shoe, and the top has a shoe mount adapter with a tripod screw. By using this adapter, the DR-70D can be attached to the accessory shoe of a digital SLR camera. Also, by mounting the accessory shoe on the top of the DR-70D case, you can use it to attach a shotgun mic or wireless mic transmitter to the DR-70D. This makes a variety of setups possible.
Two 3.5 mm Stereo Mini Jack Cables
The DR-70D has an output jack that allows audio input through the DR-70D to be recorded directly to the camera. By using the two 3.5-mm stereo mini jack cables included in this package, you can monitor audio from both the DR-70D and the camera with one set of headphones without the need to change connections. Simply connect one cable between the DR-70D CAMERA OUT jack and the camera's AUX IN (or other audio input) jack, and the other between the camera's headphones output jack and the DR-70D CAMERA IN jack.
- This product is on order with our suppliers. Please note that we are experiencing delays from most of our suppliers and cannot guarantee delivery times. Where possible, we recommend that you choose an alternative product that is showing as being in stock. Feel free to contact us for help, thank you.
This item is normally sent to Mainland UK addresses by DPD who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.
FREE delivery within mainland UK
UK Non-Mainland: £ 12
Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout). Please see our international delivery page or contact us for details.
1 Recommended Accessory
Brand Tascam Condition New
Tascam DP-03SD Digital Portastudio (Ex-Display)
Regular Price: £249.00
Special Price: £224.00