Studio Electronics Attenulag Eurorack Module
The Studio Electronics Attenulag offers two attenuverters and two lag generators in a 10HP module.
- Dual attenuators which handle audio signals or CV
- Both attenuators linked
- Dual lag generators which operate linked or independently
- 10HP Eurorack format module
- Read More
Multi-purpose heavy lifter. The attenuators reduce level, audio or CV, when switch is set to off. With the switch up the audio/signal passes through at full level. The inputs are linked together. Patching into channel 1 drives both attenuators: patching into channel 2 breaks the link. Experimentation with key tracking to create alternative tunings, or interaction with audio inputs that don't afford attenuation does good things. The two lag circuits provide a handy CV mult/hub for oscillator and filter tracking (perfect for CV-ing up the OSCILLATION module with its switchable one in/three out structure for both attenuation and slewing—x2) and are linked together. If you patch into channel 1 only, the outputs of both channels are driven (just like the attenuation circuit): patching into channel 2 breaks the link and they become two separate CV mult/lag circuits—envelopes look out.
Studio Electronics Attenulag Specifications
ATTENUATE 1, ATTENUATE 2, LAG TIME 1, LAG TIME 2.
OFF: the top two handle attenuation duties, the bottom are wired to lag time.
Ten Patch Points
ATTENUATE 1: IN, OUT: LAG TIME 1: IN, OUT 1A, OUT 1B, OUT 1C: ATTENUATE 2: IN, OUT: LAG TIME 2: IN, OUT 2A, OUT 2B, OUT 2C
Common Controls and Patch Points
ATTENUATE: Level reduction.
IN: Attenuation input.
OUT: Attenuation output.
OFF: Bypass is in up position.
LAG TIME: Exponential slewing amount—still affectionately called glide in some quarters.
IN: Lag input.
OFF: Lag bypass.
OUT A: Lag output A.
OUT B: Lag output B.
OUT C: Lag output C.
Depth: 25 mm with ribbon cable attached
Power Usage: 15mA