RME ADI-8 QS Format Converter

RME ADI-8 QS Format Converter

Product code: rmeadi8qs

RME's ADI-8 QS is an 8-Channel hi-end AD/DA converter with an unrivalled feature set.

  • RME ADI-8 QS Format Converter

    RME's ADI-8 QS is an 8-Channel hi-end AD/DA converter with an unrivalled feature set.

    Main Features

    • 8-Channel AD converter, fully symmetrical design, 117 dBA
    • 8-Channel DA converter, DC-coupled signal path, double balanced output, 120 dBA
    • Low latency conversion: only 8 samples of delay!
    • 4 x AES/EBU I/O via D-Sub, 8 channels @ 192 kHz
    • 2 x ADAT I/O, 8 channels @ 96 kHz
    • Digital input/output trim, range 6 dB per I/O
    • Analogue and digital limiter for AD-conversion
    Read More

    The ADI-8 QS combines excellent analogue circuit design with outstanding low latency AD/DA converter chips of the latest generation. Along with the integrated SteadyClock, the QS offers an AD- and DA-conversion of the highest quality.

    Analogue and digital limiters, 4 hardware reference levels up to +24 dBu, AES/EBU and ADAT I/O (optional MADI I/O) at up to 192 kHz, remote control via MIDI, digital input and output trimming for full level calibration, volume control for all 8 analogue outputs, either separately or globally, digital thru-mode, operation over a wide voltage range and many more features make the QS truely unique.

    This 1U high device offers an outstanding AD/DA conversion from/to AES/EBU and ADAT (MADI optional), at up to 192 kHz. The balanced inputs and outputs use RMEs circuit design, therefore guaranteeing outstanding noise and distortion values. Four different input and output levels each are available, offering a perfect adaptation to the analogue domain. The latest generation AD/DA converters provide samplerates up to 192 kHz with a SNR of 120 dBA.

    Due to its efficient jitter reduction, SteadyClock™ guarantees pristine sound quality independently from the quality of the external clock signal. Additionally Intelligent Clock Control (ICC) will retain the last valid sample frequency in case of a loss of the input signal.

    The technologies known from other RME products like SyncCheck ® ensure perfect synchronisation and clear detection of errors. Multiple units can be stacked and operated sample-aligned, using word clock. All settings are stored when the unit is switched off.

    The QS can be fully remote controlled and configured via MIDI, and all status displays can be queried through MIDI. Each QS can be given a separate ID, allowing separate remote controllability of various devices with only one MIDI channel.

    The included Hardware Remote Control allows to control the monitoring volume directly from the working place. A reference volume once saved can be recalled anytime, and of course RME didn't forget to add a DIM function (-20 dB).

    Low Latency
    In the QS RME uses a high-class AD converter from Cirrus Logic, offering exceptional Signal to Noise and distortion figures. But the biggest difference to all other ADCs out there is its innovative digital filter, achieving for the first time a delay of only 12 samples in Single Speed (0.25 ms), 9 samples in Double Speed (0.09 ms), and 5 (!) samples in Quad Speed (0.026 ms).

    These values are less than a quarter of those available from even much more expensive devices. They represent an important step in further reducing the latency in the computer-based recording studio. At DS and QS the added latency can simply be ignored. The DA-converter offers similar conversion in the range of 5 to 10 samples, turning analogue digital monitoring into real analogue-style monitoring!

    Optional: I64 MADI Card
    The I64 MADI Card extends the QS with a 64-Channel MADI input and output and a sophisticated digital patch mode.

    The card has an optical and a coaxial MADI input, which is switched automatically according to where a valid input signal is detected. This ensures full redundancy by immediately changing to the other input in case of signal loss. Coaxial and optical output operate in parallel, delivering the same data.

    MADI can be used as an optional clock source (Clock section, OPTN), as signal source of the DA-converter, target of the AD-converter, and as digital thru. Since each QS converts only 8 channels, up to 56 channels can be passed through. This technique is used to serially cascade several QS converters. Incoming MADI data is passed through unchanged, only one block of eight channels is replaced. This allows up to 8 devices to be connected serially, with all 64 combined channels available at the last device's MADI output. When multiple devices are connected serially, the function Delay Compensation removes sample offsets between the units.

    The QS can also be remote controlled via MADI, and send/receive MIDI data via MADI.

    Additionally the i64 card enables a digital patch mode, that allows free routing of all I/Os based on blocks of 8 channels (needs i64 MADI card with Sync LEDs and firmware 3.x or up). In this mode, the 8 analogue channels, AES, ADAT input 1 and 2, and 8 x MADI are available as input sources for the same number of outputs. The unit then works as digital format converter, rebuilds a MADI signal from various sources, inserts, converts and much more at the same time. Please read the QS manual for more detailed information.

    Technical Specifications

    Input AD: 1/4inch TRS jack and 25 pin D-sub, servo balanced, completely symmetrical audio path
    Output AD: 4 x AES/EBU, 2 x ADAT optical, optional MADI
    Input DA: 4 x AES/EBU, 2 x ADAT optical, optional MADI
    Output DA:1/4inch TRS jack servo balanced, up to +21 dBu. 25 pin D-sub, balanced, up to +24 dBu. DC-coupled audio path
    Dynamic Range AD: 117 dBA
    THD AD: < -110 dB (< 0.00032 %)
    THD+N AD: < -104 dB (< 0.00063 %)
    Crosstalk AD: > 130 dB
    Dynamic Range DA: 120 dBA unmuted
    THD DA: < -104 dB (< 0.00063 %)
    THD+N DA: < -102 dB (< 0.0008 %)
    Crosstalk DA: > 110 dB
    Input level for 0 dBFS: +24 dBu, +19 dBu, +13 dBu, +4.2 dBu, each adjustable by 6 dB in steps of 0.5 dB via Digital Input Trim
    Output level for 0 dBFS: +24 dBu, +19 dBu, +13 dBu, +4.2 dBu, each adjustable by +/- 6 dB in steps of 0.5 dB
    Output level global: 0 down to -96 dB in 48 steps
    Sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, variable (sync/word)
    Frequency response AD/DA, -0.1 dB: 10 Hz - 23.2 kHz (sf 48 kHz)
    Frequency response AD/DA, -0.5 dB: < 5 Hz - 44.6 kHz (sf 96 kHz)
    Frequency response AD/DA, -1 dB: < 5 Hz - 63.4 kHz (sf 192 kHz)
    Power supply: Internal switching mode ps, 100 V-240 V AC
    Dimensions (WxHxD) 483 x 44 x 200 mm


    8 x Analogue I/O (up to +24 dBu)
    4 x AES/EBU I/O (8 channels @ 192 kHz)
    2 x ADAT I/O (SMUX and SMUX4)
    MIDI I/O
    Word Clock I/O
    optional MADI I/O (I64 MADI Card)
    Remote Control (Volume, DIM, Preset)

  • This product will be ordered in from our suppliers as required. Please contact us for availability.

    This item is normally sent to Mainland UK addresses by DPD who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.

    FREE delivery within mainland UK

    UK Non-Mainland: £ 12

    Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout). Please see our international delivery page or contact us for details.

  • Additional Information

    On demo in store No
    Brand Rme
    Condition New