RCF HDL 10-A Active Line Array PA Speaker (Single)
The very compact size, no compromise transducers and a unique composite cabinet design make the RCF HDL 10-A the perfect tool in many situations.
Please note that this is a special order item and as such, is not subject to our normal returns policy.
- 1400 Watt Peak power - 700 Watt RMS
- 65 Hz 20 kHz frequency response
- 2 x 8 inch Woofers, 1 x 2 inch Compression Driver
- DSP controlled Input section with selectable presets
- Tour grade safe and solid variable mechanics
- Composite PP enclosure structurally wooden reinforced
- Read More
Please note that you will need an RCF Fly Bar to use these speakers.
The HDL 10-A is the ideal choice when line array performance is needed and a fast and easy set up is a must. The system is powered from a 1400 Watt Peak Power 2 way digital amplifier, sound is processed from a powerful DSP.
Tour Sound In A Compact Size
The HDL 10-A is a two way active line array module designed for live sound reinforcement and installed sound applications. It features: 2 x 8-inch woofers, 1 x 2.5-inch titanium compression driver, digital amplifier with switch mode power supply and DSP controlled Input section with selectable presets.
The HDL 10-A is a true active and high power ready to use touring system equipped with a high efficiency digital amplifier that delivers superior SPL reducing energy requirement. The integrated processing and the cabling reduction will make the set-up faster and easier and, thanks to its compact size, the truck space requirement is reduced to the minimum.
Fully Integrated System
The integrated processing and the cabling reduction will make the set-up faster and easier. The compactness and lightweight of the system combined with top of class steel on board mechanics helps during rigging operations as well as during transportation.
The HDL 10-A is powered by a 1400W peak power digital amplifier, split 200W for the HF and 500W for the LF. A new generation DSP handles all the processing within the cabinet and allows adjustment of Cluster size and HF projection. The DSP also includes presets for indoor/outdoor usage and highly curved arrays. All these setting are accessed by the buttons on the rear of the cabinets.
The easy to access controls on the back of the speaker allow a number of simple optimisations to be carried out at the flick of a switch: two possible HF settings, four possible cluster configurations, a special EQ setting for high curved configurations and an Indoor Correction EQ.
RCF Shape Designer Software
In order to assist with the set up procedures for the HDL 10-A line array system, RCF has developed a complete prediction software package.
The software enables a complete two dimensional simulation of the behaviour of the HDL 10-A modules and also suggest the correct subwoofer combination.
The system curvature angles and the sound projection data are computed with maximum sound pressure levels for the given design.
The software will allow simulations up to a maximum of sixteen HDL 10-A systems. The rigging menu provides data for weight, centre of gravity and length of the array configuration. Rigging points and rigging hardware configurations are also computed.
RCF HDL 10-A Specifications
Frequency Response -3 dB: 65 Hz ÷ 20000 Hz
Max SPL: 133 dB
Horizontal coverage angle: 100°
Vertical coverage angle: 15°
Compression Driver: 2 inch, 2.5 inch voice coil
Woofer: 2 x 8 inch, 2.0 inch voice coil
Input signal: Balanced/unbalanced
Input connectors: XLR
Output connectors: XLR
Input sensitivity: -2 dBu / +4 dBu
Crossover frequencies: 800 Hz
Protections: Thermal, RMS
Limiter: Soft limiter
Controls: Cluster, HF, High curving, Indoor
Total power: 1400 W PEAK (HF 400W, LF 1000W)
Total power: 700 W RMS (HF 200W, LF 500W)
Connections: Powercon in/out
Cabinet Material: Composite PP, wooden reinforced
Hardware: Rigging flyware
Handles: 2 side
Dimensions (H x W x D): 294 x 569 x 434 mm / 11.5 x 22.4 x 17.09 inches
Weight: 20.4 Kgs / 44.97 lbs