Quested SB10R 10 inch subwoofer, incl 1U stereo powered controller
Designed as a partner for any of the full-range monitors in the S-Series. The Quested SB10R will extend system frequency response down to 20 Hz and increase the system's maximum spl.
The filter bypass on the left channel optimises the SB10R's performance when it is used as a dedicated LFE monitor in a multi-channel system. With the 2-in 2-out bass management, a single SB10R can reinforce a stereo pair of full range cabinets.
A long throw 10 inch cast chassis driver is mounted in a tuned cabinet constructed of 26 mm MDF
Tradition is broken in that the matched 215W RMS amplifier and 2-channel SB10R controller are housed in a separate, single 1U rack space unit. Due to this Remote Power, the electronics do not suffer the adverse effects caused by the LF vibrations that are created by the drive unit. Also, calibration and operation of the SB10R controller are much easier to achive quickly and in comfort with the unit sited close to hand.
• Size (WxHxD): 617 x 333 x 290 mm
• Weight: 19.8 kgs
• Driver: 1 x 250 mm (10 inch)
• Input Connector: 1 pair gold plated binding posts
• Impedance: 2.3 ohm
SB10R Controller Specifications
• Size: 1U case, 270 mm depp
• Weight: 5.5 kgs
• Input Connector: 2 of XLR and 1/4 inch jack combo socket
• Left/Right Monitor Outs: 2 of XLR outs
• Sub Bass Output: 1 pair binding posts
• Crossover: 40 -135 Hz
• > 210W rms continuous