Primacoustic RX7-UF Recoil Stabilizer, Up Fire (Single)
Use a Primacoustic Recoil Stabiliser to isolate your monitor speakers, increasing clarity, transient response, and depth of field.
- Isolate the recoil of loudspeaker motion
- Eliminate resonant coupling
- Laser cut steel plate
- High density urethane foam base
- Increased punch and low end
- Improved transient response
- Greater overall detail
- Read More
Designed for nearfield monitors, the Primacoustic Recoil Stabiliser is a unique speaker mounting device that at once eliminates disruptive resonant coupling from the loudspeaker to the stand, while providing a stable base that reduces the recoil caused by the forward energy of the loudspeaker motion.
The Recoil Stabiliser is a loudspeaker platform that combines three basic components: a high-density urethane foam base to isolate the speaker from the shelf, monitor-bridge or stand, a heavy 1/4-inch laser-cut steel plate, and a thin neoprene top surface. The foam effectively decouples the loudspeaker to eliminate vibration-borne resonance that invariably introduces phase anomalies, while the steel plate introduces significant mass to the structure, stabilising the speaker. The no-slip surface coats the top to ensure the monitor stays firmly in place.
By reducing the backward recoil as the speaker coil pushes energy forward, the initial transient no longer suffers lag and the sharpness of the resulting impulse is more defined. Upon first listening, one immediately notices more punch and extended low end. Upon further listening, one begins to notice greater detail at all frequencies, improved transient response and more defined depth of field. This not only makes mixing easier, but since the Recoils eliminate unknown resonance from contaminating the sound, your mixes immediately translate better to other rooms and audio systems.
The Recoil Stabiliser is available in various sizes, weights and firing angles to address the vast array of speaker designs currently on the market and personal mounting preferences.
The Recoil Stabiliser is a nearfield monitor platform that incorporates four different elements to create the whole. This includes:
Thin no-slip neoprene surface secures the nearfield monitor to the top surface for maximum signal transfer.
Laser cut 1/4-inch (6mm) steel platform adds the necessary stabilising mass to rigidly hold the nearfield monitor in place.
Curved front panel
Curved front panel eliminates standing waves and adds mass to the platform without increasing the footprint.
High density open cell acoustic foam provides acoustic isolation to eliminate coupling between loudspeaker and shelf.
Up-fire Recoils are designed for post production suites where monitors are often placed directly on a desk top. These introduce a more acute 10-degree angle that better directs the tweeter to the listening position. The up-fire angle can also be handy for smaller near field monitor when placed along side larger ones when sharing the same shelf.
Max Load: 44lbs / 20kg
Height: 3.4 / 1-in / 86 / 25mm
10.5-in x 13-in (263mm x 330mm)