Primacoustic RX5-DF Recoil Stabilizer, Down Fire (Single)
Use a Primacoustic Recoil Stabiliser to isolate your monitor speakers, increasing clarity, transient response, and depth of field.
- Isolate the recoil of loudspeaker motion
- Eliminate resonant coupling
- Laser cut steel plate
- High density urethane foam base
- Increased punch and low end
- Improved transient response
- Greater overall detail
Designed for nearfield monitors, the Primacoustic Recoil Stabiliser is a unique speaker mounting device that at once eliminates disruptive resonant coupling from the loudspeaker to the stand, while providing a stable base that reduces the recoil caused by the forward energy of the loudspeaker motion.
- Read More
The Recoil Stabiliser is a loudspeaker platform that combines three basic components: a high-density urethane foam base to isolate the speaker from the shelf, monitor-bridge or stand, a heavy 1/4-inch laser-cut steel plate, and a thin neoprene top surface. The foam effectively decouples the loudspeaker to eliminate vibration-borne resonance that invariably introduces phase anomalies, while the steel plate introduces significant mass to the structure, stabilising the speaker. The no-slip surface coats the top to ensure the monitor stays firmly in place.
By reducing the backward recoil as the speaker coil pushes energy forward, the initial transient no longer suffers lag and the sharpness of the resulting impulse is more defined. Upon first listening, one immediately notices more punch and extended low end. Upon further listening, one begins to notice greater detail at all frequencies, improved transient response and more defined depth of field. This not only makes mixing easier, but since the Recoils eliminate unknown resonance from contaminating the sound, your mixes immediately translate better to other rooms and audio systems.
The Recoil Stabiliser is available in various sizes, weights and firing angles to address the vast array of speaker designs currently on the market and personal mounting preferences.
The Recoil Stabiliser is a nearfield monitor platform that incorporates four different elements to create the whole. This includes:
Thin no-slip neoprene surface secures the nearfield monitor to the top surface for maximum signal transfer.
Laser cut 1/4-inch (6mm) steel platform adds the necessary stabilising mass to rigidly hold the nearfield monitor in place.
Curved front panel
Curved front panel eliminates standing waves and adds mass to the platform without increasing the footprint.
High density open cell acoustic foam provides acoustic isolation to eliminate coupling between loudspeaker and shelf.
The DF or down-fire model introduces a 5-degree angle to compensate for the added 2-in (5cm) height that the Recoil Stabiliser will introduce when put in position. This is often a good choice when the near fields are used on a meter bridge or elevated shelf that cannot be adjusted.
Max Load: 23lbs / 10.4kg
Height: 2.75 / 1.9-in / 70 / 48mm
7.5-in x 9.5-in (190mm x 241mm)
- This product will be ordered in from our suppliers as required. Please contact us for availability.
This item is normally sent to Mainland UK addresses by DPD who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.
Mainland UK: £3.50 within mainland UK ( Orders over £99 are delivered FREE )
UK Non-Mainland: £ 12
Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout).
Order this item before 4pm and receive it on the next working day, mainland UK only*
On demo in store No Brand Primacoustic Condition New