Presonus Eris E5 5 inch Active Studio Monitors (Pair) (Ex-Display)
The Presonus Eris E5 monitors deliver studio-accurate sound from a compact enclosure.
- 5.25-inch Kevlar® low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- 80 watt Class AB biamplification
- Front-firing acoustic port for superior bass-frequency reproduction
- RF interference, output current limiting, over-temperature, transient, and subsonic protection
- Optimised, resonance-suppressing internal bracing
- Balanced XLR/¼-inch and unbalanced RCA inputs
- Read More
When you're ready to get serious about recording, it's time to step up to PreSonus Eris-series studio monitors. Cheap computer speakers and home-stereo speakers won't reveal the truth about your mix. They aren't designed for that.
In contrast, Eris E5 speakers are real studio monitors, delivering a very accurate response with a tight bass and very clear upper end. That's what you need in a home studio. Thanks to well-designed Kevlar low frequency transducers, low-mass silk-dome tweeters, responsive Class AB amplification, and professional acoustic-adjustment controls, Eris 5 delivers the goods.
When Size Matters
If space is at a premium, or if you want the ultimate in portability, the compact Eris E5 takes up just 7 x 10.24 x 7.68 inches (178 x 260 x 195 mm) and weighs in at just 10.2 lbs (4.63 kg). You can shoehorn this little beauty into almost any studio space.
The E5 sports a 5.25-inch, Kevlar low-frequency driver, mated with a 45W, Class AB amplifier and a 1-inch (25 mm), silk-dome tweeter powered by a 35W, Class AB amplifier. It can crank out a clean 102 dB SPL, peak. Frequency response is rated at 53 Hz to 22 kHz. For a studio monitor in its size and price class, that's impressive.
The Eris E5 provides balanced XLR, balanced 1/4 inch TRS, and unbalanced RCA line-level inputs. When both balanced connections are in use, the TRS input will supersede the XLR input. The RCA input is summed into the signal path. With this selection, you'll have no problem hooking your Eris E5's up with virtually any line-level source.
You're in control!
Today's music producers deal with a wide variety of musical genres and often work in more than one location. It's easy to take your Eris E5 speakers with you when you want to work in a different space. It's almost as easy to customise their sound for your room and type of music.
The most basic control is the Input Gain, which determines the signal level before it reaches the power amp. This is part of gain-staging your overall system: that is, setting the levels for every part of the recording chain in order to get the optimal level of clean audio all the way through. Once you've gain-staged your system, you can leave this control alone.
The Eris E5 provides three EQ controls in its Acoustic Tuning section: High, Mid, and Low Cutoff. These controls enable you to fine-tune the monitors and even to broadly approximate the sounds of different types of speakers so you can hear what your mix might sound like, for instance, on a car stereo or portable radio. The Low control also is useful when using the E5 with a subwoofer.
In addition to the Acoustic Tuning controls, Eris E5's offer a three-position Acoustic Space switch. This switch controls a second-order, low shelving filter that cuts the level of all frequencies below 800 Hz by a specified amount (-2 or -4 dB) to compensate for the boundary bass boost that occurs when the monitor is placed near a wall or corner. If you don't want to roll off those lows, set it to 0 dB.
This combination of controls lets you create a linear response for accurate monitoring and enables you to simulate different listening environments, so you don't have to listen to mixes on your car, consumer computer speakers, and home stereo to check how the music sounds with different systems. Instead, you can adjust the Eris monitors' response and test your mixes without leaving your studio. No other monitors in this price class offer this degree of control.
Any loudspeaker is subject to an assortment of environmental and performance problems, and Eris monitors offer protection from most common of these. RF shielding protects against radio frequencies that could be induced into the signal and become audible. (If you've ever heard a radio broadcast unexpectedly coming out of a guitar amp, that's the result of RF interference.)
Eris monitors also provide over-temperature protection to avoid heat-related issues, current-output limiting (to prevent damage should there be a short circuit on the speaker terminals), and subsonic protection to filter out extremely low-frequency vibrations that could interfere with the woofer's performance.
Finally, Eris' power amplifiers have a 'soft startup' so that you don't get damaging pops in the speakers when you power them up.
Eris E5 Specifications (Per Speaker)
1- Balanced XLR
1- Balanced 1.4 inch TRS
1- Unbalanced RCA
Frequency Response: 53 Hz - 22 kHz
Crossover Frequency: 3 kHz
LF Amplifier Power: 45W
HF Amplifier Power: 35W
Peak SPL (@ 1 meter): 102 dB
LF Driver: 5.25 inch Kevlar
HF Driver: 1 inch silk dome
Input Impedance: 10 k ohm
Volume Range:A-type taper
MF Control: -6, 0, +6 dB
HF Control: -6, 0, +6 dB
Low Cut: Flat, 80 Hz, 100 Hz
Acoustic Space: Flat, -2 dB, -4 dB
External mains fuse
Dimensions (W x D x H): 178 x 195 x 260 mm / 7 x 4.68 x 10.24 inches
Weight: 4.63 Kgs / 10.2 lbs.
- Sorry - this product is not available to purchase
Brand Presonus Condition Ex-display Power 51-100W Specifications
1- Balanced XLR
1- Balanced 1.4 inch TRS
1- Unbalanced RCA
|Customer Comment||Our Response|
Exactly as described, great condition!
Great value for money.
|Read more reviews on Feefo|