Pittsburgh Modular Phase Shifter Eurorack Effects Module

Pittsburgh Modular Phase Shifter Eurorack Effects Module

Product code: pitps

The Pittsburgh Modular Phase Shifter is a complex, 16 stage, analogue effect module designed to expand on the classic swirls, rich swooshes, and doppler effects associated with the phaser.


  • Pittsburgh Modular Phase Shifter Eurorack Effects Module

    The Pittsburgh Modular Phase Shifter is a complex, 16 stage, analogue effect module designed to expand on the classic swirls, rich swooshes, and doppler effects associated with the phaser.

    Main Features

    • All analogue multi-stage phaser
    • Onboard LFO with audio range
    • 2 sets of CV inputs for external modulation sources
    • 26hp Eurorack module

    The Phase Shifter has a single 16 stage audio signal path to create a very rich, full sound. Phased audio outputs are tapped from stages 7, 8, 15, and 16. Stages 8 and 16 each have a mix output that allow the phased signal to be mixed with an attenuvertable dry signal.

    Read More



    Four CV inputs, an onboard LFO, and multiple CV routing options allow for maximum flexibility and extremely deep modulation options. The CV inputs are split into 2 groups. The first group of CV inputs controls either all 16 stages or just stages 1-8. The second group of CV input controls stages 9-16 and is switchable on or off. All CV signals routed to stages 9-16 can be inverted. Resonance can be positive or negative and the module will self oscillate in either direction.

    To modulate the phase shifter circuit, the module includes a wide range low frequency oscillator. The LFO range varies from 1 minute per cycle to well into audio range. The triangle wave of the LFO is hardwired to modulate the frequency of all 16 channels of the Phase Shifter. External modulation sources are handled using 2 sets of CV inputs. Each set includes an invertible, uni-polar CV input that accepts 0v to 5v modulation signals and a bi-polar CV input which accepts -5v to +5v signals. All of the modulation CV inputs can be used simultaneously and can be mixed with the internal LFO to create very complex frequency modulations. Stages 1-8 and 9-16 can be modulated together or independently using the available switches and CV inputs.


    PHASE SHIFTER CONTROL DESCRIPTIONS

    Frequency Control Knob: Adjusts the center frequency.

    Resonance Control knob: Adjusts the amount of resonance.

    LFO Frequency Control Knob: Adjusts the rate of the LFO.

    LFO Send Level: Adjusts the amount of LFO used to modulate the frequency. Full left is off.

    LFO Triangle Wave Out and Square Wave Out: Individual LFO waveform outputs.

    LFO Range Switch: Adjust the frequency range of the LFO.

    CV Inputs Uni-Polar CV In Control Knob, CV Input, and Invert Switch: Main uni-polar CV input for all 16 stages. Control knob adjusts the incoming CV level. Invert switch inverts the incoming CV signal.

    CV Inputs Bi-Polar CV In Control Knob and CV Input: Main bi-polar CV input for all 16 stages. Control knob adjusts the incoming CV level.

    Enable CV Inputs 9-16 Switch: Enables or disables CV Inputs 9-16 section. When enabled, external modulation for stages 9-16 uses the CV Inputs 9-16 section instead of the CV Inputs section.

    Invert CV Stages 9-16 Switch: Invert switch inverts the modulation source for stages 9-16.

    CV Inputs 9-16 Uni-Polar CV In Control Knob, CV Input, and Invert Switch: Alternative uni-polar CV input for stages 9-16. Control knob adjusts the incoming CV level. Invert switch inverts the incoming CV signal.

    CV Inputs 9-16 Bi-Polar CV In Control Knob and CV Input: Alternative bi-polar CV input for stages 9-16. Control knob adjusts the incoming CV level.

    8 Stage Out Static Wave Blender Control Knob and Mix Output: Mix of the unphased dry signal and the output of the 8th stage of the Phase Shifter. The Static Wave Blender is an attenuverter for the dry signal.

    Stage 7 Output: Output of the 7th stage of the Phase Shifter.

    Stage 8 Output: Output of the 8th stage of the Phase Shifter.

    16 Stage Out Static Wave Blender Control Knob and Mix Output: This is the main mix out. Mix of the unphased dry signal and the output of the 16th stage of the Phase Shifter. The Static Wave Blender is an attenuverter for the dry signal.

    Stage 15 Output: Output of the 15th stage of the Phase Shifter.

    Stage 16 Output: Output of the 16th stage of the Phase Shifter.

    Input Drive Knob: Audio signal input level contol.

    Input Jack: Audio Signal Input


    Size: 26hp
    Depth: 35mm
    Power Usage: 165mA

  • This product will be ordered in from our suppliers as required. Please contact us for availability.

    This item is normally sent to Mainland UK addresses by DPD who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.

    FREE delivery within mainland UK

    UK Non-Mainland: £ 12

    Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout) International orders over £250 are delivered FREE except for large or heavy items. Please see our international delivery page or contact us for details.

  • Additional Information

    Brand Pittsburgh Modular
    Condition New
    On demo in store No

FeeFo Reviews

This product has no reviews yet.