MXR M169 Carbon Copy Analog Delay Pedal  (ex-display)

MXR M169 Carbon Copy Analog Delay Pedal (ex-display)

Product code: bstmxrm169

The MXR M169 Carbon Copy Analog Delay features a completely analog audio path for the ultimate in rich, warm delay-made possible only by old-school bucket brigade technology. This design boasts an amazing 600ms of delay time with optional modulation via a top-mounted switch and a simple, three-knob layout that controls Delay time, Mix (dry/wet blend), and Regen (delay repeats)-all in a pedal no bigger than a Phase 90.


  • MXR M169 Carbon Copy Analog Delay Pedal (ex-display)


    The MXR M169 Carbon Copy Analog Delay features a completely analogue audio path for the ultimate in rich, warm delay—made possible only by old-school bucket brigade technology.

    This design boasts an amazing 600ms of delay time with optional modulation via a top-mounted switch and a simple, three-knob layout that controls Delay time, Mix (dry/wet blend), and Regen (delay repeats)—all in a pedal no bigger than a Phase 90.

    Read More



    In addition, two internal trim pots offer user-adjustable width and rate control of the modulation for even more tonal options. The Carbon Copy will take you from crisp 'bathroom' slap echoes to epic, Gilmour-esque delays with a twist of a knob. True hardwire bypass, single 9-volt operation, and stage-ready blue LEDs round out the package.

    MXR M169 Carbon Copy Specifications

    • Input Impedance (Effect ON): 1meg Ohm
    • Output Impedance (Effect On): 1K Ohm Max
    • Max Input Level: [email protected] (ref 1V RMS)
    • Max Output Level: +8dBV
    • Signal to Noise ([email protected] CCW): [email protected] CW > 96dB 'A' weighted
    [email protected] CW >: 104dB 'A' weighted
    • Delay Distortion: <[email protected], -5dBV Input
    • Delay Time: 20msec to 600msec
    • Noise Reduction: 2:1 reduction ratio
    • Modulation Speed: 0.2Hz to 2.2Hz
    • Housing Dimensions: 4-3/4 inch x 2-3/4 inch x 1-9/32 inch
    • Weight: 14oz.
    • Housing Material: Zinc
    • Bypass: True-Hard-Wire
    • Power Draw: 26mA Max
    • Power Requirement: Dunlop ECB-03 9VDC adapter with 5.5mm x 2.1mm positive barrel and negative center.

  • Sorry - this product is not available to purchase
  • Additional Information

    stock message Currently Unavailable to purchase
    Brand Mxr
    Condition Ex-display
    Specifications

    • Input Impedance (Effect ON): 1meg Ohm

    • Output Impedance (Effect On): 1K Ohm Max

    • Max Input Level: [email protected] (ref 1V RMS)

    • Max Output Level: +8dBV

    • Signal to Noise ([email protected] CCW): [email protected] CW > 96dB 'A' weighted

    [email protected] CW >: 104dB 'A' weighted

    • Delay Distortion: <[email protected], -5dBV Input

    • Delay Time: 20msec to 600msec

    • Noise Reduction: 2:1 reduction ratio

    • Modulation Speed: 0.2Hz to 2.2Hz

    • Housing Dimensions: 4-3/4 inch x 2-3/4 inch x 1-9/32 inch

    • Weight: 14oz.

    • Housing Material: Zinc

    • Bypass: True-Hard-Wire

    • Power Draw: 26mA Max

    • Power Requirement: Dunlop ECB-03 9VDC adapter with 5.5mm x 2.1mm positive barrel and negative center.

FeeFo Reviews

This product has no reviews yet.