Markbass LMK 2 Channel Bass Head 500 Watt (ex-display)

Markbass LMK 2 Channel Bass Head 500 Watt (ex-display)

Product code: bstmrkbasslmk

Mark Bass LMK 2 Channel Amplifier Head 500 Watts RMS @ 4 Ohm Two independent or combinable channels of quality lightweight bass amplification. Can be used with 2 bass guitars, double bass combined, single bass guitar etc. to create previously unattainable tonal variations. 2nd channel can also be used for any other sound source. INPUTS INPUT A (master)
• Impedance 500 Kohm, max. voltage 15 Vpp INPUT B
• Impedance 500 Kohm, max. voltage 15 Vpp EFFECT RETURN
• Impedance 22 Kohm, max.


  • Markbass LMK 2 Channel Bass Head 500 Watt (ex-display)


    Mark Bass LMK 2 Channel Amplifier Head 500 Watts RMS @ 4 Ohm
    Two independent or combinable channels of quality lightweight bass amplification.
    Can be used with 2 bass guitars, double bass combined, single bass guitar etc. to create previously unattainable tonal variations. 2nd channel can also be used for any other sound source.
    INPUTS
    INPUT A (master)
    • Impedance 500 Kohm, max. voltage 15 Vpp
    INPUT B
    • Impedance 500 Kohm, max. voltage 15 Vpp
    EFFECT RETURN
    • Impedance 22 Kohm, max. voltage 10 Vpp

    Read More


    CONTROLS
    GAIN CH1
    • –80 dB to +23 dB range
    GAIN CH2
    • –80 dB to +26 dB range
    LINE OUT
    • Level control on front panel
    GROUND LIFT
    • Switch on rear panel
    EQUALIZATION
    CH1
    LOW: Centre frequency: 40 Hz: level: ±16 dB
    LOW MID: Centre frequency: 360 Hz, level: ±16 dB
    HIGH MID: Centre frequency: 800 Hz, level: ±16 dB
    HIGH: 10 kHz shelf: level ±16 dB
    VPF (Variable Pre-shape Filter): Centre frequency: 380 Hz (cut)
    VLE (Vintage Loudspeaker Emulator): Frequency range cut: 250 Hz – 20 kHz
    CH2
    LOW: Centre frequency: 40 Hz: level ±16 dB
    LOW-MID: Centre frequency: 360 Hz, level ±16 dB
    HIGH-MID: Centre frequency: 800 Hz, level ±16 dB
    HIGH: 10 kHz shelf: level ±16 dB
    VPF (Variable Pre-shape Filter): Centre frequency: 380 Hz (cut)
    OUTPUT
    LINE OUT
    • Balanced XLR, max. voltage 10 Vpp
    EFFECT SEND
    • Unbalanced, max. voltage 20 Vpp (pre-EQ)
    TUNER OUT
    • Unbalanced, max. voltage 25 Vpp
    SPEAKER OUT
    • Speakon, 1/4 Inch
    OTHER
    DIMENSIONS
    • 10.87 (W) x 10 (D) x 2.8 (H) Inches
    • 27.6 (W) X 25.6 (D) X 7.1 (H) CM
    WEIGHT
    • 6.39 lbs / 2.9 kg
    FOOTSWITCH
    • CH1, CH2, CH1+CH2, mute
    OUTPUT POWER
    • 300W RMS @ 8 ohm, 500W RMS @ 4 ohm
    POWER REQUIREMENT
    • 100/120V: 230V: 240V
    • 50/60Hz

    All models are equipped with Markbass-designed power supply circuitry.
    Minimum ohm load for all Markbass heads is 4 ohms.
    The balanced XLR output on the LMK is PRE-EQ and cannot be modified!

  • Sorry - this product is not available to purchase
  • Additional Information

    On demo in store No
    Brand Markbass
    Condition Ex-display
    Amp Use Bass

FeeFo Reviews

This product has no reviews yet.