Markbass EVO 1 500 Watt Dual Channel Head

Product code: bstmrkmbh110054

The Markbass EVO 1 offers you the opportunity for endless tonal combinations by combining two fully featured channels.

  • Markbass EVO 1 500 Watt Dual Channel Head (Ex-Display)

    The Markbass EVO 1 offers you the opportunity for endless tonal combinations by combining two fully featured channels.

    Main Features

    • Two customisable channels
    • Full tone controls
    • Ability to mix both channels
    • Build custom amp channels with EVO 1 software
    • 500W power amp

    Read More

    The Markbass EVO1 head is the result of the mix between classic and advanced technology evolution to allow bassists to have not only just a 'gorgeous' bass sound, but always the 'right' sound... no matter which genres and techniques you're playing! It offers six AMPS tone choices for each of the two channels, clean and distorted.

    Bass players have always been inspired by the possibility to mix two amplifiers tones and to blend clean and distorted sounds as Jaco Pastorius did back in the years. With the Markbass EVO 1 that's possible, opening many more sound options experimenting with two amps playing simultaneously.

    Both channels feature classic standard amp controls interface and one effect each (you can update AMPs and effects picking and downloading your favourite ones from the Markbass website), MIDI In port, on board tuner, aux in and headphones out, FX loops, XLR Line Outs, and a powerful 500W MPT (Mark Proprietary Technology) power amp.

    You can update AMPs choices on each channel at your preference thanks to the MARKBASS EVO 1 SOFTWARE, that also allows to update FX choices for each channel and customise their parameters, plus you can set the Boost level that can be switched on/off via MIDI.

    The optional Markbass EVO 1 CONTROLLER allows to engage CH1 / CH2 or MIX both, turn on/off the FX1, FX2 and BOOST, plus accessing the TUNER with MUTE function pressing and holding the boost switch. The Markbass EVO 1 can be controlled also via programmable MIDI pedalboard.

    At DV Mark, Marco De Virgiliis invested a lot of resources in R&D to develop a proprietary power amp technology, designed to respect and glorify the tone of your instrument.

    INPUT 1: impedance 1MΩ
    INPUT 2: impedance 1MΩ
    AUX IN: stereo mini-jack 3.5mm
    RETURN 1 / RETURN 2: mono jack 1/4-inch (50KΩ)
    USB: type B
    MIDI: DIN 5 poles

    SPEAKER OUTPUT (4ohms minimum load)
    two mono jack 1/4-inch + one Speakon (in parallel)
    PHONES : stereo mini-jack 3.5mm
    SEND 1 / SEND 2: mono jack 1/4-inch (1KΩ)
    LINE OUT 1: XLR male balanced
    LINE OUT 2: XLR male balanced

    TWO (with six Virtual AMPs per channel) + MIX mode

    EQUALIZATION (per channel)

    GAIN (per channel)
    Amps Selection: 6 for CH1 / 6 for CH2
    LEVEL (per channel)
    FX 1
    FX 2

    Switch CH1, CH2, MIX
    Controllable by the optional Markbass EVO1 Controller / MIDI Pedalboard

    Channels Switch / Mix
    GND Lift switches, PRE/POST MIX (LINE OUTs)
    TUNER (with MUTE function)
    440Hz / half step down / whole step down modes

    14.18-inches / 36 cm (w), 3.94-inches / 10 cm (h), 10-inches/ 25.4 cm(d)

    7.05 lbs / 3.2 Kg

    OUTPUT POWER (MPT Power Amp)
    500W RMS @ 4 ohms, 300W RMS @ 8 ohms

    230V 50Hz (Voltage is factory preset according to region of sale).

    Markbass amps/combos are manufactured to be sold and used in the country of purchase, and are factory preset to that country's voltage. Due to homologation issues, the voltage may not be changed.

  • Sorry - this product is not available to purchase
  • Additional Information

    Brand Markbass
    Condition Ex-display
    Amp Use Bass
    Amp Type Head
    Power 401-500W