M-Audio BX5 D2 Active Studio Monitor (Single)

M-Audio BX5 D2 Active Studio Monitor (Single)

Product code: maubx5d2

The M-Audio BX5 D2 active monitor offers clean, accurate sound through it's active Class A/B amp and 5 inch driver.


  • M-Audio BX5 D2 Active Studio Monitor (Single)

    The M-Audio BX5 D2 active monitor offers clean, accurate sound through it's active Class A/B amp and 5 inch driver.

    Main Features

    • Bi-amplified design with 70 watts of distributed power for cohesive, accurate sound
    • 5 inch low-frequency drivers with Kevlar cones for rich, defined lows
    • 1 inch high-frequency drivers with natural silk domes and integrated waveguides for smooth, clear highs
    • Optimised rear ports for extended low-frequency response
    • Magnetic shielding eliminates interference with other electronic equipment
    • XLR balanced and 1/4 inch balanced/unbalanced inputs
    Read More


    The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend this legacy with an elegant new design inside and out. They've leveraged technology from their high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analogue amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum whilst the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you'll enjoy the utmost accuracy in an engaging listening experience.
    Accurate and Enjoyable
    Whether you're recording, mixing, or mastering, your monitors are your primary reference source. Accurate monitors let you hear exactly what's happening in your mixes and give you the assurance that your music will translate well to other listening environments. The M-Audio BX5 D2 monitors leverage a decade of monitor engineering expertise to deliver exceptional transparency and sonic definition—allowing you to enjoy marathon mixing sessions with minimal listening fatigue.
    Designed for Pros—and Beginners
    Countless pros use M-Audio studio monitors to produce and mix the music and audio you hear every day. The BX D2 series makes that same design philosophy and technology available to anyone with a passion for great sound. BX5 D2 helps you understand what's in your mix so you can make better decisions about how it will translate across a wide variety of systems—from MP3 earbuds to car stereos to audiophile rigs.
    Silk-Dome, Waveguide-Loaded, High-Frequency Drivers
    M-Audio's high-frequency domes are made from natural silk to counter the audible ringing that is inherent in the poorly crafted metallic materials often found in other monitors. The high-frequency driver is fully isolated from the rest of the enclosure to ensure minimum distortion, providing ultra-smooth frequency response up to 22 kHz. It also features a built-in waveguide, which offers an expansive sound stage and exceptional imaging.
    Kevlar Low-Frequency Drivers
    To insure a lifetime of service, the BX5 D2 monitor's 5 inch low-frequency driver is constructed from woven Kevlar. Kevlar's high mechanical and thermal resilience makes it ideal for use in speaker cones. M-Audio's engineers also created a curved conical design that improves room dispersion. High-damping reliable rubber surrounds provide percussive musical bass, and insure that the cone reaches its optimal excursion for accurate reproduction. The high-temperature voice coils reduce power compression, guaranteeing that your monitors will deliver full performance hour after hour.
    Rear-Ported Cabinet Design
    The BX5 D2 cabinet is integrally designed with its other components for optimal performance: right down to rounded corners for reduced edge diffraction and superior imaging. The custom rear port is designed to minimise air turbulence and resulting distortion while adding additional low frequency extension.
    Bi-Amplified Efficiency
    The Class A/B bi-amplified design dedicates separate power amps to the high and low frequencies thus providing ample headroom for even the loudest and most dynamic of mixes. Combined with a finely tuned crossover, the design ensures that each driver only delivers the frequencies that it can reproduce most efficiently, resulting in tonal accuracy and cohesive sound across the entire frequency spectrum.
    Find the Sweet Spot Quickly and Easily
    When monitoring, it's important to sit in the middle position or 'sweet spot' between the two speakers where the stereo image is optimised. BX5 D2 features a pinhole power LED that makes finding the sweet spot easy. You'll know you're in the right listening position when the BX5 D2 power LEDs appear to be brightest.

    M-Audio BX5 D2 Specifications
    Frequency Response: 56Hz-22kHz
    Crossover Frequency: 3 kHz
    Low-Frequency Amplifier Power: 40 watts
    High-Frequency Amplifier Power: 30 watts
    Maximum Signal-To-Noise (Dynamic Range): > 100 dB (typical A-weighted)
    Polarity: Positive signal at + input produce outward LF cone displacement
    Input Impedance: 20 k ohms balanced, 10 k ohms unbalanced
    Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
    Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
    Cabinet: Vinyl-laminated MDF
    Size: 19.5 x 17.6 x 25.2 cm / 7.7 x 7 x 10 inches
    Weight: 5 Kg / 11 lbs.

  • This product is in stock and ready to ship

    This item is normally sent to Mainland UK addresses by DPD who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.

    Mainland UK: £3.50 within mainland UK ( Orders over £99 are delivered FREE )

    UK Non-Mainland: £ 12

    Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout). International orders over £250 are delivered FREE.

    Order this item before 4pm and receive it on the next working day, mainland UK only*

  • Additional Information

    Brand M-Audio
    Condition New
    Power 51-100W
    Specifications
    Frequency Response: 56Hz-22kHz
    Crossover Frequency: 3 kHz
    Low-Frequency Amplifier Power: 40 watts
    High-Frequency Amplifier Power: 30 watts
    Maximum Signal-To-Noise (Dynamic Range): > 100 dB (typical A-weighted)
    Polarity: Positive signal at + input produce outward LF cone displacement
    Input Impedance: 20 k ohms balanced, 10 k ohms unbalanced
    Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
    Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
    Cabinet: Vinyl-laminated MDF
    Size: 19.5 x 17.6 x 25.2 cm / 7.7 x 7 x 10 inches
    Weight: 5 Kg / 11 lbs.

Other products to consider

FeeFo Reviews

This product has no reviews yet.