Line 6 M20d mixer plus L3t & L3m full-range speakers & 2 x L3s subwoofers (Ex-Display)

Line 6 M20d mixer plus L3t & L3m full-range speakers & 2 x L3s subwoofers (Ex-Display)

Product code: bstlsxstagesys

This Line 6 StageScape System offers the M20d mixer along with the L3 speakers and L3s Subwoofers. This fully integrated PA set up offers a new, musician-friendly way of mixing live sound usingLine 6's intuitive graphical mixing approach.


  • Line 6 M20d mixer plus L3t and L3m full-range speakers and 2 x L3s subwoofers (Ex-Display)

    This Line 6 StageScape System offers the M20d mixer along with the L3 speakers and L3s Subwoofers. This fully integrated PA set up offers a new, musician-friendly way of mixing live sound usingLine 6's intuitive graphical mixing approach.

    Main Features

    • Fully integrated live sound solution
    • Ground breaking new approach to getting your live sound 'right'
    • M20d mixer features intuitive graphical interface
    • L3 feature accelerometers which detect orientation and self configure
    • L3s Subs detected and configured automatically
    • L6 LINK digital network inetgrates the entire system
    Read More

    Package consists of:

    • 1 x Line 6 StageScape M20d Digital Mixing System
    • 1 x Line 6 StageSource L3t 1400 Watt 3-Way Speaker System, Top
    • 1 x Line 6 StageSource L3m 1400 Watt 3-Way Speaker System, Slave
    • 2 x Line 6 StageSource L3s 1200 Watt Bi-amped Bass-reflex Subwoofer


    Line 6 StageScape M20d Digital Mixing System

    StageScape M20d features an intuitive, 7 inch full-colour resistive touchscreen interface to get you mixing fast. The touchscreen displays icons on a stage that represent each performer or input, replacing generic rows of knobs and faders. Now you can reach for elements in the mix as you see them on the stage in front of you. A single touch on a performer's icon gives full access to all parameters relating to that channel, from basic tweaks through deep effects editing.

    Auto-sensing Inputs and Outputs
    From solo performances to full band shows, setting up for gigs is fast and easy. With auto-sensing inputs throughout, StageScape M20d activates each microphone or line input as soon as you plug in a cable and automatically configures a custom channel strip setting that includes essential gain, EQ, effects and routing. The monitor and main outputs work the same way. Plug in a PA speaker or monitor and it immediately appears on the touchscreen and output signals are automatically routed.

    Control the Mix via iPad, Wherever You Are
    The convenience of mobility has become integral to so many aspects of our lives, and the M20d extends that convenience to the stage. Connect one or more iPad® devices simultaneously (via optional USB Wi-Fi adaptor) for complete remote control over all mixer functions. Adjust the front-of-house mix from anywhere in the audience.

    Each iPad® can control different screens or different parameters in addition to the mixer's own touchscreen. Whether you're a band member adjusting your monitor mix or a sound man out in the audience, you've got full control.

    Professional Suite of Dynamics, EQ and FX on Every Channel
    StageScape M20d provides a professional suite of dedicated Dynamics, EQ and FX processors custom tailored to each channel including fully parametric EQs, dynamic EQs, filters, standard and multi-band compression, limiters, gates, delays and more. That's over 100 professional audio processors ready at all times to create the perfect mix. 32-bit floating point processing throughout provides pristine, high-resolution sound quality. Everything you need to get professional instrument and vocal sounds is available where you need it, when you need it.

    Multi-channel Recording, With or Without a Computer
    StageScape M20d is designed to make recording so easy that it can be done any time, all the time — even without a computer. The M20d records 16 channels plus the main mix in high-resolution, 24-bit WAV format to SD card, USB drive or direct to your Mac® or PC. The convenience of being able to record to external media means you can track at a moment's notice with no DAW setup required. Since the recorded output is pre-effects, the raw tracks will be ready for later mixing in the recording software of your choice. The M20d enables you to easily capture everything — from ideas and rehearsals to entire performances — in the way that works best for you.

    Multi-band Feedback Suppression
    Since feedback can quickly ruin a performance, StageScape M20d features per-channel multi-band feedback suppression. The technology quickly identifies problem frequencies and compensates automatically.

    Feedback suppression works by continuously analysing the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applying a narrow notch filter to remove the offending frequency. You can control up to 12 independent feedback frequencies.

    Quick Capture Sound Checking
    At the touch of a button, StageScape can record up to 20 seconds to internal memory from any of the inputs. Quick Capture sound check enables you to work on dialing in the perfect sound quickly by looping a recording of the input, whether a drum sound, an acoustic guitar, a vocal or the entire band. Best of all, you can use an iPad® to adjust your front-of-house full band mix from the audience while you listen to the sound check playback.

    Digital Networking via L6 LINK and the Dream Stage
    Connect StageScape M20d to Line 6 StageSource speaker systems via L6 LINK-enabled speaker systems to create the ultimate digitally networked dream stage setup. StageScape automatically recognises which loudspeakers are being used as monitors and routes monitor feeds. Main PA speakers automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimisation. StageScape automatically recognises subwoofers and sets crossovers, and detects which loudspeakers are being used as monitors and routes monitor feeds.

    When connected via L6 LINK, StageScape M20d and StageSource speakers are capable of unparalleled power and flexibility. Together they redefine the typical mixer-speaker paradigm to introduce a smarter live sound experience in which the live rig is a complete, intelligent ecosystem rather than merely a linear combination of components.

    Tweak Pad, Visual Multi-parameter Control
    For quickly dialling in channel EQ, dynamics and FX, StageScape M20d provides an incredibly easy-to-use Tweak Pad X-Y multi-parameter controller. Drag a finger toward common sound descriptors like 'bright' or 'dark' and multiple parameters adjust simultaneously to achieve that sound. For experienced engineers who want fine control over all parameters, Deep Edit Mode provides detailed plug-in-style interfaces, with discrete calibrated adjustment capability.

    Total Scene Recall
    StageScape can save and recall a virtually unlimited number of stage setups, scenes and channel DSP presets. Line 6 provide a huge library of professionally crafted channel DSP presets to get you started and dramatically accelerate the process of getting great instrument and microphone sounds. Plug in a kick drum mic, choose a kick drum preset and StageScape automatically configures a custom-tailored suite of channel processors – all you have to do is drag your finger around the Tweak Pad to dial in the perfect kick drum sound.

    Four Stereo Master Effects Engines
    Four master stereo effects engines supply pristine studio quality reverbs, delays, a vocal doubler and more. The StageScape Master Stereo Reverb effect delivers studio-grade algorithms for adding the perfect amount of high-resolution ambience and character to lead vocals and the overall mix. You also get an additional stereo reverb effect engine for creating custom-tailored instrument or backing vocal reverbs.

    The third effects engine is a magnificent vocal doubler that delivers stunning depth and richness to any lead or backing vocal. Finally, the fourth stereo effects engine offers a choice of professional delays, chorus and flanger effects to add textures to instruments and the overall mix.


    Line 6 StageSource L3t 1400 Watt 3-Way Speaker System, Top

    StageSource™ L3t is designed to be the world's most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3t output is optimised for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speaker's orientation and set the Smart Speaker mode accordingly.

    Powerful 1,400-watt, Three-way Design
    The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3t to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.

    Fast Networking via L6 LINK
    In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify set up. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimisation. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.

    Integrated Multi-channel Mixer With Effects
    The L3t can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L3t delivers all of the tools you need for great live sound.

    Orientation and Pole-mount Sensors
    StageSource L3t uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimise the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance.

    For example, when the unit is powered on in a horizontal position, it automatically selects Floor Monitor mode. This mode provides a slight reduction in low-frequency content to counteract coupling when placing the speaker on the floor.

    If any 'backline' mode is chosen (Keyboard, Acoustic Guitar, Electric Guitar), the L3t then checks its orientation (via the accelerometer) and looks to see if it is on a pole (via the pole sensor). If the speaker is vertical and not on a pole, the L3t activates Virtual Tilt-back, which optimises the speaker tuning to achieve an upward tilt to its main axis. This helps to aim the sound upward towards the performer's ears when the speaker is placed on the ground. If the speaker is on a pole, it doesn't activate Virtual Tilt-back because it assumes that the speaker is elevated and aimed in the desired direction.

    Integrated Feedback Suppression
    Since feedback can ruin a performance, StageSource L3t uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound.

    L3t feedback suppression continuously analyses the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L3t feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyser to one of three modes, depending on how aggressively the analyser will seek out potential feedback frequencies.

    Multi-function Design and Scalability
    Multi-function design combined with powerful Smart Speaker modes and digital networking provides true scalability whether you're using a single L3t as a standalone PA or multiple L3t speakers as main PA, monitors and backline. Add StageSource L3s subwoofers and customise a configuration to meet your live sound or installation needs.

    Road-ready Construction
    StageSource L3t is ready for whatever the road can throw at it. The burly enclosure is constructed of dual-braced, heavy-duty plywood and a tour-grade steel grille with protective screen backing that protects the drivers from impact damage.

    If you need to fly the speakers, each StageSource L3t features four professional M10 suspension points with a pull-back.

    Scalable systems with L3t and L3m
    In addition to the L3t loudspeaker and L3s subwoofer systems, the StageSource™ series also includes the L3m 1,400-watt, 3-way tri-amped, high performance powered loudspeaker system. Designed to expand the capabilities of any existing L3t based or third party PA system, StageSource L3m features balanced XLR/TRS combo jack input, stereo auxiliary inputs, integrated L6 LINK™, and the same multi-function design, Smart Speaker modes, and multi-band feedback suppression from the StageSource L3t loudspeaker system.


    Line 6 StageSource L3s 1200 Watt Bi-amped Bass-reflex Subwoofer

    Designed for the widest range of scenarios, Line 6 Smart Speaker modes allow you to configure the subwoofer output to deliver the perfect low-end performance at the touch of a button. Whether you need a huge punchy kick and bass for a live rhythm section, or deep sub-bass lows for use in a DJ rig, Smart Speaker modes make setup simple and deliver stunning sound in every application.

    Fast Networking via L6 LINK
    In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimisation. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.

    Flexible Crossovers
    StageSource L3s features four user-selectable crossover frequency settings: 80 Hz, 100 Hz, 120 Hz and Off. This allows you to simply choose the low-pass frequency of the signals played back by the 12-inch woofers. Selecting a crossover frequency simultaneously selects the high-pass frequencies sent to the stereo outputs.

    Multi-function Design and Scalability
    Multi-function design combined with powerful Smart Speaker modes and digital networking provides true scalability whether you're using a single L3t as a standalone PA or multiple L3t speakers for use as mains, monitors and backline. Add StageSource L3s subwoofers and customise a configuration to meet your live sound or installation needs.

    1200W, 2x12, Bi-amp Design
    With enough power to deliver punchy low end to large audiences, StageSource L3s features a 1,200-watt, bi-amplified design for superb bass reproduction and maximum headroom. The dual 12-inch woofers are mounted in a bass reflex configuration, for extended bass response and extremely low distortion.

    Stereo In/Out/Thru
    Using StageSource L3s with your existing live sound rig is easy. The I/O section includes stereo inputs to accommodate mixers and line-level sources, and stereo outputs to connect to additional loudspeakers.

    Tour-grade Construction
    StageSource L3s is ready for whatever the road can throw at it. The robust enclosure is constructed of dual-braced, heavy-duty plywood and a tour-grade steel grille with protective screen backing that protects the drivers from impact damage.

    For true flexibility, three threaded M20 pole-mounts (one top-mounted, two side-mounted) allow easy use with other StageSource speakers in both vertical and horizontal orientations. All fitments are designed to meet the demands of professional use.

    Heavy-duty doesn't mean have to mean heavy. To get it safely from the van to the stage without breaking a sweat, StageSource L3s features built-in, rattle-free wheels and three robust ergonomic handles that are solid and placed well.


    Line 6 StageSource L3m 1400 Watt 3-Way Speaker System, Slave

    Designed to expand the capabilities of any existing L3t based or third party PA system, StageSource L3m features balanced XLR/TRS combo jack input, stereo auxiliary inputs, integrated L6 LINK™, and the same multi-function design, Smart Speaker modes and multi-band feedback suppression from the StageSource L3m loudspeaker system.

    Powerful 1,400-watt, Three-way Design
    The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.

    Fast Networking via L6 LINK
    In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify set up. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimisation. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.

    Integrated Multi-channel Mixer With Effects
    The L3m can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L3m delivers all of the tools you need for great live sound.

    Orientation and Pole-mount Sensors
    StageSource L3m uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimise the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance.

    For example, when the unit is powered on in a horizontal position, it automatically selects Floor Monitor mode. This mode provides a slight reduction in low-frequency content to counteract coupling when placing the speaker on the floor.

    If any 'backline' mode is chosen (Keyboard, Acoustic Guitar, Electric Guitar), the L3m then checks its orientation (via the accelerometer) and looks to see if it is on a pole (via the pole sensor). If the speaker is vertical and not on a pole, the L3m activates Virtual Tilt-back, which optimises the speaker tuning to achieve an upward tilt to its main axis. This helps to aim the sound upward towards the performer's ears when the speaker is placed on the ground. If the speaker is on a pole, it doesn't activate Virtual Tilt-back because it assumes that the speaker is elevated and aimed in the desired direction.

    Integrated Feedback Suppression
    Since feedback can ruin a performance, StageSource L3m uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound.

    L3m feedback suppression continuously analyses the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L3m feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyser to one of three modes, depending on how aggressively the analyser will seek out potential feedback frequencies.

    Multi-function Design and Scalability
    Multi-function design combined with powerful Smart Speaker modes and digital networking provides true scalability whether you're using a single L3m as a standalone PA or multiple L3m speakers as main PA, monitors and backline. Add StageSource L3s subwoofers and customise a configuration to meet your live sound or installation needs.

    Road-ready Construction
    StageSource L3m is ready for whatever the road can throw at it. The burly enclosure is constructed of dual-braced, heavy-duty plywood and a tour-grade steel grille with protective screen backing that protects the drivers from impact damage.

    If you need to fly the speakers, each StageSource L3m features four professional M10 suspension points with a pull-back.

  • Sorry - this product is not available to purchase
  • Additional Information

    Brand Line 6
    Condition Ex-display

FeeFo Reviews

This product has no reviews yet.