Korg Kaoss Pad KP3+ Dynamic Effects Processor and Sampler
The Kaoss Pad series of effects units is famed for its intuitive touch-pad interface. The Korg KP3+ is based on the KP3 and the effects combinations that have become a staple in numerous genres and applications have been taken to a new and cutting-edge level. The KP3+ is a complete update for an effects unit that will generate the sounds of 2013 and beyond.
- Use the touchpad to control effects in real time
- A total of 150 effects ideal for DJ mixing and sound design
- High-spec sampling functionality
- USB MIDI allows for use as a powerful MIDI controller
- Store sample data on an SD/SDHC card
- Dedicated editor software for centralised management of sample data and settings
- Read More
Use the touchpad to control effects in real time
The intuitive design and amazing flexibility of the touchpad allows Kaoss Pad 3+ users to easily control multiple effects and parameters by simply stroking, tapping, or rubbing the Kaoss touch pad with their finger. Using this remarkable design, you can easily control effects in complex ways that would be impossible on a conventional effect unit.
A total of 150 effects
The KP3+ provides new effect programs that are worthy of its status as the flagship model of the Kaoss Pad series. The KP3+ contains a total of 150 programs - 22 more than the KP3.
In addition to the 108 effects carried over from the KP3, which include filters, spatial-type effects such as delay and reverb, a grain shifter that freezes tiny pieces of sound and repeats them, and a vocoder, there are 42 new or improved effects that represent today's dance music scene, including effects that were newly developed for the Kaoss Pad Quad, such as the Looper, Vinyl Break, and Ducking Compressor.
Vinyl Break simulates a turntable
It's easy to obtain the scratch sound that's heard when you scratch a turntable, or use a record-stop effect. In addition to the basic Mod.1 Vinyl Break, the KP3+ also provides the new Mod.2 Break Reverb which adds reverb to the effect, and the LoP.2 Break Looper and LoP.8 Loop Breaker effects which combine the effect with a Looper.
Ducking Compressor emphasises the backbeats
You can use a side-chain effect to emphasise the backbeats of the kick. In addition to Mod.8 Ducking Compressor, there's a new rEV.1 Pump Reverb that adds a reverb effect. You can add a sense of 'breathing' to your music by dynamically varying the reverberation in synchronisation with the BPM.
Newly-designed Looper lets you freely manipulate loops
For greater usability, the Looper effect has been modified to let you loop the sound starting from the instant you touch the touchpad. The existing programs have been significantly updated. For example, if you move your finger to change the number of beats in the loop, the timing of that change will automatically be quantised. There are also many new programs such as LoP.4 Freeze Looper, LoP.6 Shuttle Looper, and the LoP.7 Slice Looper that finely slices a phrase and loops the location that you choose.
Effects for breaks and drops
New effects include dLY.2 Echo Break and rEV.3 Reverb Break, which mute the input sound and generate delay or reverb. These are ideal ways to create breaks in your DJ play. Korg have also enhanced the synth sound effects that are effective when used during a break, bringing them up to date for the evolving dance music scene. Newly added sounds include Syn.3 Pump Noise (noise without resonance, processed by a side-chain effect) as well as Syn.4 Lofi Synth and Syn.9 Resonator.
Other added effects include FL.16 Center Canceler for partial vocal cancellation, LFO.1 Jag Filter which uses a non-resonant filter to chop the sound, dLY.5 One Delay which shines on styles such as hip-hop, and Grn.6 Stutter Grain which alternately applies a grain shifter and a Looper. We completely rethought the X-axis and Y-axis parameter assignments and their polarity, and included flashy and glittering synth sounds as well as many more effects that will enhance the latest sounds of today's scene.
Intuitive sampling functionality
The KP3+ features enhanced sampling functionality that lets you perform using multiple effects and samples. Each of the four sample banks can record a sample up to 13 seconds long, and play it either as a one-shot or loop. The KP3+ also has functions such as a start point adjustment that lets you create a half-beat shift to create 'doubled' effects, a new slice function that edits the structure of a loop sample to instantly create completely new phrases, and a resampling function that lets you apply an effect to a sample and then re-sample the result.
Samples can be triggered in four different ways as appropriate for your situation. The volume of each sample bank can also be adjusted by the LEVEL slider or the touchpad, either together or individually.
Functions for greater expressive power
The FX Release function automatically adds a delay to smoothly blend the effect when you release the touchpad. The Mute function cuts the input sound, leaving only the reverb or other effect sound, and can also be used as a 'transformer' by turning it rapidly on and off. Pad Motion lets you record and play back the movements of your finger on the touchpad.
There are eight program memories that let you instantly select your favourite effect programs, and a Hold effect that sustains the effect even after you release your finger from the touchpad. The pad LEDs illuminate along the path that's traced by your finger, letting you perform without difficulty even in a dimly lit DJ booth. Korg have modified the way that the four sampling bank LEDs illuminate to make them more intuitively understandable than on the KP3, they now light up red during recording and green during playback.
With MIDI IN/OUT jacks and a USB port, it's easy to control external MIDI devices. Loop data and user settings such as programs can be stored on an SD/SDHC card. The KP3+ Editor is also available, which provides sample data librarian functionality as well as a MIDI assignment editor.