JBL ASB6115 15 inch Passive Subwoofer (ex-display)
- In Stock
- 800 watts continuous pink noise,, 3200 watts peak power handling capacity
- Large vent area for high output with low distortion
- For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products
- 2265H-1 15 inch Differential Drive® dual voice coil dual gap, neodymium magnet transduce
The ASB6115 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL's
2265H-1 Differential Driver dual voice coil dual gap 15 inch woofer. This woofer features neodymium magnet and ultra robust cone for extra long life.
The enclosure is constructed of multiply hardwood coated in JBL's rugged DuraFlex™ finish and is heavily braced to maximize low-frequency performance. The rectangular enclosure is fitted with sixteen M10 threaded attachment points and utilizes a 14-gauge steel grille internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance.
The ASB6115 is part of JBL's AE Series, a versatile family of loudspeakers intended for a wide variety of applications.
JBL ASB6115 Specifications
Frequency Range (-10 dB): 32 Hz - 1 kHz
Frequency Response (± 3 dB): 42 Hz - 1 kHz
Transducer Power Rating: 800 W (3200 W peak), 2 hrs.
Long-Term System Power Rating: 675 W (2700 W peak), 100 hrs.
Maximum SPL (1m): 35 Hz - 400 Hz: 126 dB-SPL cont avg (132 dB peak)
System Sensitivity: 35 Hz - 400 Hz: 97 dB-SPL, 1W (2.83V) @ 1m
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® driver
Enclosure: Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D invertical cabinet orientation): 483 x 419 x 597 mm(19.0 x 16.5 x 23.5 in)
Weight: 20.6 kg (45.5 lb)
This product is in stock and ready to ship
This item is normally sent to Mainland UK addresses by DPD Local who generally provide a one-hour window of delivery on the morning of delivery by email or text message.
Mainland UK: FREE delivery within mainland UK
UK Non-Mainland: from £12
We regret that we do not ship this item outside the UK
12 Months warranty