* SPECIAL OFFER * Focal Alpha 50 Complete Studio Monitoring System
Complete Focal monitoring solution including a pair of Alpha 65 6 inch monitors and a Presonus 8 inch subwoofer.
- System frequency response: 30Hz - 22kHz
- Low directivity: keeps the same sound throughout the room
- Tonal balance is identical at low and high volumes - low sensitivity to the wall effects
- Optimal acoustic integration
- Cables Included
- Read More
Package consists of:
• 2 x Focal Alpha 50 Active Studio Monitor, Single
• 1 x Presonus Temblor T8 Active Studio Subwoofer
• 2 x 3 metre balanced jack to Male XLR cable
• 2 x 2 metre male XLR to female XLR cable
Focal Alpha 50 Active Studio Monitors
The Focal Alpha 50 Active Studio Monitor is the most compact of the Alpha series and is perfectly adapted for confined spaces.
The Alpha 50 Active 2-way near field professional monitoring loudspeaker is composed of a 5-inch (13cm) woofer/ midrange speaker with a Polyglass cone loaded in a large laminar port and of a 1-inch (25mm) aluminium inverted dome tweeter. It features a 20W amplifier for the tweeter and a 35W amplifier for the woofer, and has a frequency response of 45Hz to 22kHz (+/- 3dB).
Specifications (per speaker)
Frequency response (+/- 3dB): 45Hz - 22kHz
Power: 55W (35W+20W)
Maximum SPL: 103dB SPL (pic @1m)
Inputs/Connectors: XLR balanced 10kOhms, RCA unbalanced 10kOhms with sensitivity compensation
LF amplifier stage: 35W, class AB
HF amplifier stage: 20W, class AB
Standby mode: After about 30 minutes without using the monitor
Activation from Standby mode: By signal detection >3mV
Power Connection IEC inlet and detachable power cord
Sensitivity: Adjustable, 0 or +6dB
LF shelving (0 - 300Hz): Adjustable, +/-6dB
HF shelving (4.5 - 22kHz): Adjustable, +/-3dB
Power ON/OFF: Switch on rear panel
Indicators: Power ON/OFF LED, Standby LED
Woofer: 5 inch (13cm) drive unit, Polyglass cone
Tweeter: 1 inch (25mm) drive unit, Aluminium inverted dome
Cabinet Construction: 0.6 inch (15mm) MDF
Cabinet Finish: Vinyl and Black painting
Dimensions, with 4 rubber pads (HxWxD): 12.3 x 8.7 x 10.2 inches (313 x 220 x 258mm)
Weight: 16.1lb (7.3kg)
Presonus Temblor T8 Active Studio Subwoofer
The Presonus Temblor T8 is a versatile and powerful active studio subwoofer that perfectly complements any monitoring setup.An ideal companion to Eris™ and Sceptre™ active reference monitors and Ceres BT-series active speakers, the Temblor T8 subwoofer complements full-range monitors without overshadowing them, extending the reach of your full-range system's low end with a musical and natural approach.
Powerful and musical, the Temblor T8 features high-quality components and design that enable it to deliver fast and accurate transient response, extending low frequencies without a hint of 'tubbiness' or overshoot.
Suitable for personal studios, gaming, audiophiles, and home theaters, the smaller T8 uses a downward-firing, 8-inch glass-composite driver with high-density rubber surround and a round, rear-firing bass-reflex acoustic port. Its 200W Class AB amplifier (100W RMS) delivers up to 104 dB SPL, with a frequency response of 30 Hz to 300 Hz.
The Temblor's extensive user controls include input gain (-30 dB to +6 dB, continuously variable) and a continuously variable lowpass filter (50 Hz to 130 Hz) that let you create a seamless crossover transition between your full-range studio monitors and subwoofer for a more accurate listening environment.
A switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor's outputs to the main monitors, avoiding destructive cancellation and reinforcement in the subwoofer's upper range.
The T8 provides two sets of inputs: left and right, balanced 1/4 inch TRS and unbalanced RCA main inputs. This enables it to pair well with PreSonus' Ceres BT-series active speakers and home-stereo speakers, as well as personal-studio systems. The T8 offers left and right balanced 1/4 inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers.
Presonus Temblor T8 Specifications
2- Balanced 1/4 inch TRS
2- Unbalanced RCA
2- Balanced 1/4 inch TRS (full range with 80 Hz HPF option
2- Unbalanced RCA (full range with 80 Hz HPF option)
Frequency Response: 30 Hz – 200 Hz
Low Pass Filter Frequency: 50 – 130 Hz (variable)
Signal-to-Noise Ratio: >98 dB (A weighted)
Amplifier Power: 200W peak, 100W RMS
Amplifier Type: Class AB
Peak SPL at 1m: 104 dB
Woofer: 8 inch glass-composite, downward-firing
Acoustic Port: Rear-firing bass reflex (round)
Input Gain Range: -30 to +6 dB
Polarity Switch: 0° or 180°
Low Pass Filter Control: 50 Hz to 130 Hz
High Pass Filter Switch: On/Off
External mains fuse
Dimensions and Weight
Dimensions (W x D x H): 260 x 320 x 280 mm / 10.2 x 12.6 x 11 inches
Weight: 9.6 Kgs / 21.2 lbs.