* SPECIAL OFFER * Focal Alpha 50 Active Studio Monitor Bundle
The Focal Alpha 50 Active Studio Monitor is the most compact of the Alpha series and is perfectly adapted for confined spaces. This bundle includes a set of IsoAcoustics isolating desktop monitor stands and balanced jack to Male XLR monitor cables.
- 5 inch studio monitors
- 45Hz - 22kHz frquency response
- Accurate for mixing
- IsoAcoustics desktop stands and cables included
- Read More
Package consists of:
• 2 x Focal Alpha 50 Active Studio Monitors
• 1 x IsoAcoustics ISO-L8R155 Desktop Monitor Stands (Pair)
• 2 x 2 metre balanced jack to Male XLR cables
Focal Alpha 50 Active Studio Monitors
The Focal Alpha 50 Active Studio Monitor is the most compact of the Alpha series and is perfectly adapted for confined spaces.
The Alpha 50 Active 2-way near field professional monitoring loudspeaker is composed of a 5-inch (13cm) woofer/ midrange speaker with a Polyglass cone loaded in a large laminar port and of a 1-inch (25mm) aluminium inverted dome tweeter. It features a 20W amplifier for the tweeter and a 35W amplifier for the woofer, and has a frequency response of 45Hz to 22kHz (+/- 3dB).
Specifications (per speaker):
Frequency response (+/- 3dB): 45Hz - 22kHz
Power: 55W (35W+20W)
Maximum SPL: 103dB SPL (pic @1m)
Inputs/Connectors: XLR balanced 10kOhms, RCA unbalanced 10kOhms with sensitivity compensation
LF amplifier stage: 35W, class AB
HF amplifier stage: 20W, class AB
Standby mode: After about 30 minutes without using the monitor
Activation from Standby mode: By signal detection >3mV
Power Connection IEC inlet and detachable power cord
Sensitivity: Adjustable, 0 or +6dB
LF shelving (0 - 300Hz): Adjustable, +/-6dB
HF shelving (4.5 - 22kHz): Adjustable, +/-3dB
Power ON/OFF: Switch on rear panel
Indicators: Power ON/OFF LED, Standby LED
Woofer: 5 inch (13cm) drive unit, Polyglass cone
Tweeter: 1 inch (25mm) drive unit, Aluminium inverted dome
Cabinet Construction: 0.6 inch (15mm) MDF
Cabinet Finish: Vinyl and Black painting
Dimensions, with 4 rubber pads (HxWxD): 12.3 x 8.7 x 10.2 inches (313 x 220 x 258mm)
Weight: 16.1lb (7.3kg)
IsoAcoustics ISO-L8R155 Desktop Monitor Stands (Pair)
The IsoAcoustics ISO-L8R155 is a versatile desktop monitor stand that allows you to adjust the positioning of your studio monitors to suit your needs. Each ISO-L8R155 stand can be configured to heights of either 3 inches or 8 inches, using inserts that also allow you to tilt your speakers if required - ideal for if the speakers are positioned too high or too low to begin with. The design of the ISO-L8R155 also helps reduce surface vibrations for optimum sonic quality.
IsoAcoustic's unique patented design provides superior audio performance by supporting the PIF Principles in acoustic design.
Placement – proximity to adjacent and nearby surfaces. ISO-L8R155 audio stands raise the audio speakers or studio monitors off the supporting surface and away from adjacent surfaces to reduce reflections.
Isolation – from supporting surfaces. Decoupling the audio speakers or studio monitors from the supporting surface reduces the energy from exciting other objects, and allows the speaker and enclosure to float independently.
Focus – Raising and tilting the audio speakers and studio monitors creates an ideal listening position by forming an equilateral triangle from the speaker to the listener, with tweeters tilted to the listener's exact ear level.
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimise its position relative to the listener. Two lengths of tubing along with 2 sets of end-plug pairs provide 14 steps of height adjustment as the combinations are used to tilt the speaker up and down. The stand can be assembled and reconfigured repeatedly to establish the ideal position off the supporting surface and focused towards the listener.
In a typical Desktop Audio Workstation configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20 inches above the work surface. An enclosure containing an 8 inch speaker may position the high frequency driver 12 inches from the bottom while an enclosure with a 6 inch speaker may position the high frequency driver only 8 inches from the bottom. Raising and tilting these examples to their optimum position can easily be achieved with this speaker stand design. The ISO-L8R155 configuration is also suited for applications over longer distances such as in large recording studios or with consumer products where home stereo speakers may ideally need to be raised 6 inches off the floor and tilted up 8 degrees.
Numerous combinations of height and tilt adjustment allow ideal listening position.
IsoAcoustics ISO-L8R155 Specifications
Base Dimensions: 6.1 x 7.5 inches
- This product is in stock and ready to ship
This item is normally sent to Mainland UK addresses by Interlink who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.
FREE delivery within mainland UK
UK Non-Mainland: £ 12
Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout) International orders over £250 are delivered FREE except for large or heavy items. Please see our international delivery page or contact us for details.
1 Recommended Accessory
Brand Focal Condition New Power 51-100W
|This product has no reviews yet.|