Dynaudio BM6A MKII and BM9 Sub Active Studio Monitoring System (Pre-Owned)
This Pre-owned Dynaudio active monitoring bundle offers a fully professional 2.1 system at an affordable price.
- 2.1 active studio monitoring system
- BM6a MKII satellites with BM9S Subwoofer
- Balanced XLR connectors
This system was taken in part exchange from a customer upgrading to Dynaudio AIR's. All components are in full working order and in good cosmetic condition. The BM6A MKII's do have some holes drilled into the base of the cabinet from where they were mounted, but this does not affect the sound quality in any way.
- Read More
The Dynaudio BM6A MKII two-way active nearfield monitor has a 6.9 inch woofer and a 1.1 inch soft dome tweeter delivering distinctive Dynaudio clarity and accuracy and exposing every audible detail for the critical and demanding engineer. Onboard LF/MF/HF placement filters, as well as subwoofer high-pass filters allow the monitor to easily adapt to any environment.
Dynaudio BM6A Mk II Specifications
• Frequency Response (+/- 3 dB): 40 Hz - 21 kHz
• Amplifier power: Tweeter 50 W / Woofer 100 W
• Crossover Frequencies: 1500 Hz
• Tweeter: Esotec 28 mm/1.1 inch soft dome, rear chamber, Magnetic fluid. 4 mm die-cast alu front, Pure alu wire voice coil
• Woofer: 175 mm/7 inch, One-piece moulded poly-prop cone, 75 mm/3 inch pure alu voice coil
• Weight: 10.5 kg / 23.12 lbs
• Dimensions (W x H x L): 203 x 335 x 327 mm / 8 x 13.2 x 12.9 inch
The BM9S is designed according to the strict BM series specifications. With a 10 inch woofer and 200 Watts of power, and virtually minute dimensions, this sub is tailor-made to take care of even the most comprehensive challenges where space is scarce. Being every bit as versatile as the rest of the BM series, BM9S is a very competent partner for smaller stereo and multichannel setups, giving a very powerful system for even the most demanding users across the globe.
The Auto On/Off function, provides a minimised idle energy usage by shutting off after minutes of no input signal. The auto sensing circuit enables BM9S to automatically come to life when input signal is detected.
The satellite filters that this sub sports, provides high-pass filtering of the monitor source signal allowing 60Hz or 80Hz corner frequencies.
This is a huge advantage for the monitor performance, as the satellites do not need to deal with power consuming lower frequencies. This leaves all the satellite power to greatly accelerate performance and precision.
Dynaudio BM9S Specifications
Frequency Response (+/- 3 dB): 29 Hz - 250 Hz
Amplifier Power: 200 W @ 4 Ohm
Crossover Frequencies HP Sat: Flat / 60 Hz / 80 Hz
Low Pass Filter: 50 – 150 Hz
Connectors: Balanced XLR
Drive Unit: 10 inch (24 cm), long throw
Weight: 10 kg / 22 lbs
Dimensions (W x H x D): 294 x 289 x 318 mm / 11.6 x 11.4 x 12.5 inches
- Sorry - this product is not available to purchase
On demo in store No Brand Dynaudio Condition Pre-owned Power 101-200W