DPA SMK-SC4061 Stereo Miniature Microphone Kit, Lo-Sens
The DPA SMK-SC4061 Stereo Microphone Kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage.
- Stereo set of 4061 Miniature mics
- Extremely rugged and reliable
- Exceptional audio quality with low noise and high sensitivity
- Adapts to all pro wireless systems
- Large selection of accessories
- Read More
The SMK-SC4061 combines two d:screet™ SC4061s Omnidirectional Miniature Microphones, Lo-Sens, with a variety of mounting accessories. These include the BLM6000 Boundary Layer Mount, which can be used in conjunction with a SC4061 (or any of the d:screet™ Miniature Mics) to place the mic on a reflective boundary such as a floor, wall, ceiling, piano lid etc, enabling them to capture the ambient sound of the area. The sound captured from this 'pressure zone' has higher sensitivity, clarity and intelligibility compared to the sound captured from the 'free air' and serves as a kind of acoustical zoom.
Also included in the kit is among others the DMM0007 soft rubber holder. This allows all kinds of instruments, from acoustic guitar through grand piano to drums, to be mounted in the best-sounding position, using special non-marking adhesive discs
The SMK-SC4061 Stereo Microphone Kit contains:
2 x SC4061 Omnidirectional Mic, Lo-Sens, Black, 3 meter cable
2 x BLM6000-B Boundary Layer Mount, Black
2 x DAD6001-BC MicroDot to 3-pin XLR (P48) w. Belt Clip
1 x DMM0007 Universal Surface Mount, 5 pcs.
2 x DMM0011-B Magnet Mount, Black
1 x DUA0560 Windscreen, Black, 5 pcs.
2 x MHS6005 Microphone Holder for Strings
Specifications for SMK-SC4061 Stereo Mic Kit w. 4061
Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarised condenser element with vertical diaphragm
Frequency range, ± 2 dB: 20 Hz - 20 kHz ±2 dB, Soft boost grid: 3 dB soft boost at 8 - 20 kHz, High boost grid: 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB: 6 mV/Pa: -44.5 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 uPa (max. 28 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: 30 - 40 Ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V – max. 50 V through DPA adapter: with DAD6001: 48 V phantom power ±4 V.
Weight: 7.5 g (0.26 oz) including cable and MicroDot connector
Microphone length: 12.7 mm (0.5 in)
Cable length: 3 m (9.8 ft)
Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB