Do not use. Correct code is bsrht5th (ex-display)
The Blackstar HT-5TH is a limited edition 2 x 10 inch combo amplifier, based on the award winning HT-5R. The Blackstar HT-5TH has the same features as the HT-5R, but it sports a sophisticated cream finish, anniversary weave fret cloth and a limited edition front panel. Each Blackstar HT-5TH comes with a unique certificate and there will only be 2500 units made worldwide, so be quick! The HT-5TH is an ideal combo amp for practice or in the studio.
- Innovative 5 Watt valve combo
- 1xECC83 and 1x12BH7 valves
- Unique push pull power amp design
- Award winning HT Pedal preamp
- Two footswitchable channels
- 2 x 1 inch" Celestion speakers
- Digital Stereo Reverb
- Read More
Innovative combo amp
The HT-5TH is the ultimate studio and practice amp, packing all the great tone and innovative features of the award-winning HT valve pedals into a two channel, footswitchable valve amp format.
Limited Edition Cosmetics
Unique cosmetics really make the limited edition HT-5TH stand out. With a cream covering, anniversary weave fret cloth and a limited edition front panel, this 5th anniversary amplifier is exclusively limited to production of just 2500 pieces worldwide.
Everything from USA to UK
The patented ISF control works with the Bass, Middle and Treble controls to give you access to infinite new sound possibilities from the USA to the UK and everywhere in-between. This fully interactive control allows you to infinitely adjust the response of the tone control network between any of the traditional voicings. In this way you can design your own sound and truly find the sound in your head.
Two Footswitchable Channels
The HT-5TH has two channels available for selection, a Clean channel and an Overdrive channel. Using the Gain control while on the Clean channel you are able to deliver everything from a clean sound through to a crunch tone. Alternatively you can select the Overdrive channel and again using the Gain control, change from a clean sound on the edge of breakup right through to a distorted lead tone.
Innovative push-pull design
The HT-5TH power amplifier is a low powered push-pull design which produces the crunch and break-up characteristics of a traditional 100W output stage, but at a much lower volume. This is achieved by the use of a 12BH7 dual triode valve in push-pull configuration producing 5 Watts output, which is rich in valve harmonics and compression, sounding full and toneful even at the lowest volume level.
Jam to your favourite track
A stereo MP3 / Line Input has been added to the HT-5TH, allowing the user to play a backing track or similar, through the amp while practising / recording.
Hook it up to a cabinet
The external speaker output on the HT-5TH allows you to connect further extension cabinets. The output marked '1x16 Ohm' is for the connection of a single 16 Ohm extension speaker cabinet (or the internal loudspeaker of the HT-5 combo). The outputs marked '1x8 Ohm or 2x16 Ohm' are for the connection of either a single 8 Ohm extension cabinet or two 16 Ohm cabinets. Also, the internal loudspeaker of the HT-5 combo can be plugged in here if it is used with a 16 Ohm extension cabinet
Add in some reverb
The HT-5TH's Reverb control sets the overall level of the reverb effect. With the control fully counter clockwise there will be no reverb. Turning the control clockwise will increase the amount of reverb.
- Sorry - this product is not available to purchase
On demo in store No Brand No Condition Ex-display Amp Use Guitar
|This product has no reviews yet.|