Crown XLi800 Power Amplifier

Main Features

• Stereo/parallel/bridge-mono mode
• User selectable input sensitivity - 0.775V and 1.4V
• Efficient forced-air cooling prevents excessive thermal buildup
• Electronically balanced RCA and XLR inputs, binding post and Speakon ® outputs
• Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
• Protection against shorts, no-load, on/off thumps and radio-frequency interference

The XLi800 power amplifiers from Crown® represents a new era in affordable, quality power amplification.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!


Crown XLi800 Specifications

Power Output: 300W 4 ohm Dual, 200W 8 ohm Dual, 600W 8 ohm Bridged
Frequency Response: 20 Hz - 20 kHz, +0/-1 dB (at 1 watt)
THD: <0.5%, 20 Hz - 20 kHz
Intermodulation Distortion: =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB)
Slew Rate: >10V/us
Voltage Gain: 33 dB
Damping Factor: (8 ohms, 10 Hz to 400 Hz) >200
Signal To Noise Ratio (A-weighted): >100 dB
Crosstalk (below rated power) 20 Hz to 1 kHz: -75 dB, -59 dB
Input Sensitivity: (for full rated power at 8 ohms) 0.775V or 1.4V
Input Impedance (nominal balanced, unbalanced): 20k ohm, 10k ohm
Dimensions: 48.3 x 8.9 x 31.5cm / 19 x 3.5 x 12.4 inches
Weight: 11.4 Kg / 25.1lbs
IEC Power Connector: 15A