Avantone CK-7 Multi-Pattern Studio Condenser Microphone

Avantone CK-7 Multi-Pattern Studio Condenser Microphone

Product code: avtck7

The Avantone CK-7 is a multi-pattern large diaphragm microphone offering a smooth and detailed sound, making it perfect for a variety of applicatiuons includings vocals.


  • Avantone CK-7 Multi-Pattern Studio Condenser Microphone

    The Avantone CK-7 is a multi-pattern large diaphragm microphone offering a smooth and detailed sound, making it perfect for a variety of applicatiuons includings vocals.

    Main Features

    • Multi-pattern FET microphone
    • -10 dB pad and 80 Hz LF metal roll off toggle switches
    • Avantone Custom Retro Shockmount included
    • Comes in a wooden case
    • Padded aluminium flightcase also included
    Read More


    The Avantone Cabernet (C-series) mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The Avantone CK-7 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics...but at a fraction of their cost!

    The rugged CK-7 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.

    The CK-7 houses a 35mm gold-sputtered thin Mylar capsule. The CK-7 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents Avantones commitment to quality as these normally are the type of 'upgrade' components that are implemented by microphone modders/hot-rodders! Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility...It exudes class visually as well as sonically.

    Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability, the versatile CK-7 mic is able to produce professional results with a clean sonic character. The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. The 3 patterns allow the CK-7 to be used in a variety of situations.

    The cardioid pattern is generally best used on vocals and single instruments. The omni mode works well in incorporating some room sound into the track. The figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides. The CK-7 has separate -10 dB pad & 80 Hz LF roll off switches. The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from 'muddying up' the track.


    Standard Items Supplied

    Avantone CK-7 Multi-Pattern FET Microphone
    Avantone Custom Retro Shockmount
    Elegant padded genuine wooden Mic box
    Padded Aluminum storage / travel case
    Owners Manual


    Avantone CK-7 Specifications

    Type: True Condenser
    Polar Pattern: Cardioid, Omni, Figure 8
    Capsule: Dual-sided 35mm center-terminated gold-sputter Mylar (6 micron)
    Frequency Response: 20-20,000 Hz +/- 3dB
    Output Impedance: <=250 Ohms
    Maximum SPL: 139dB (0.5% THD @1000Hz)
    Sensitivity: -38 dB (0 dB=1V/Pa)
    Equivalent Noise Level: (A-Weighted per IEC 286-4) < 16 dB
    Output Connector: Male XLR 3-pin
    High-Pass Switch: 80 Hz 6dB/octave
    Attenuation Switch: -10 dB
    Power Requirement: Standard 48 Volt Phantom / 5mA
    Included Accessories: Shockmount, Wooden Box in Metal Carrying Case
    Dimensions: 187 x 51 mm / 7.5 x 2 inches
    Weight: .65 kgs / 1.4 lbs
    Finish: Polished Nickel trim / Metallic Cabernet Red Body

  • This product will be ordered in from our suppliers as required. Please contact us for availability.

    This item is normally sent to Mainland UK addresses by DPD who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.

    FREE delivery within mainland UK

    UK Non-Mainland: £ 12

    Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout) International orders over £250 are delivered FREE except for large or heavy items. Please see our international delivery page or contact us for details.

  • Related Posts

  • Additional Information

    Brand No
    Condition New
    Specifications
    The rugged CK-7 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.

FeeFo Reviews

This product has no reviews yet.