Audio Technica AT2010 Condenser Microphone  (Ex-Display)

Audio Technica AT2010 Condenser Microphone (Ex-Display)

Product code: bstaudat2010

The Audio Technica AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage, for crystal-clear vocal performances.


  • Audio Technica AT2010 Condenser Microphone (Ex-Display)


    Audio-Technica Authorised Reseller Europe

    UK
    Read More

    The Audio Technica AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage, for crystal-clear vocal performances.

    Main Features

    • Extended frequency response and superior transient response for smooth, natural sonic characteristics
    • High SPL-handling and wide dynamic range provide unmatched versatility
    • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
    • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
    • Corrosion-resistant contacts from gold-plated XLRM-type connector
    • Rugged, all-metal and construction for years of trouble-free service
    • Quiet-Flex stand clamp provides silent, flexible microphone positioning

    Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.


    Audio Technica AT2010 Specifications

    Element: Fixed-charge back plate permanently polarised condenser
    Polar Pattern: Cardioid
    Frequency Response: 40-20,000 Hz
    Open Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 Pa
    Impedance: 100 ohms
    Maximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.
    Dynamic Range: 113 dB, 1 kHz at Max SPL
    Signal to Noise Ratio: 71 dB, 1 kHz at 1 Pa
    Phantom Power Requiremens: 48V DC, 2 mA typical
    Weight: 233 g / 8.2 oz
    Dimensions: 179.1 mm / 7.05 inch long, 50.8 mm / 2.00 inch maximum body diameter
    Output Connector: Integral 3-pin XLRM-type
    Accessories: AT8470 Quiet-Flex stand clamp for 5/8 inch-27 threaded stands, 5/8 inch-27 to 3/8 inch-16 threaded adapter, soft protective pouch

  • Sorry - this product is not available to purchase
  • Additional Information

    Brand Audiotechnica
    Condition Ex-display
    Specifications Element: Fixed-charge back plate permanently polarised condenser
    Polar Pattern: Cardioid
    Frequency Response: 40-20,000 Hz
    Open Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 Pa
    Impedance: 100 ohms
    Maximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.
    Dynamic Range: 113 dB, 1 kHz at Max SPL
    Signal to Noise Ratio: 71 dB, 1 kHz at 1 Pa
    Phantom Power Requiremens: 48V DC, 2 mA typical
    Weight: 233 g / 8.2 oz
    Dimensions: 179.1 mm / 7.05 inch long, 50.8 mm / 2.00 inch maximum body diameter
    Output Connector: Integral 3-pin XLRM-type
    Accessories: AT8470 Quiet-Flex stand clamp for 5/8 inch-27 threaded stands, 5/8 inch-27 to 3/8 inch-16 threaded adapter, soft protective pouch

FeeFo Reviews

This product has no reviews yet.