Ashdown EB-LITE-12-220 EVO III 1 x 12 Bass Combo Amp  (Ex-Display)

Ashdown EB-LITE-12-220 EVO III 1 x 12 Bass Combo Amp (Ex-Display)

Product code: bstasdelecblu12220

The Ashdown EB-LITE-12-220 EVO II loads Ashdown tone into a high performance 1 x 12 combo.


  • Ashdown EB-LITE-12-220 EVO III 1 x 12 Bass Combo Amp (Ex-Display)

    The Ashdown EB-LITE-12-220 EVO II loads Ashdown tone into a high performance 1 x 12 combo.

    Main Features

    • 220W RMS bass combo
    • Comprehensive 5-band EQ
    • Sub-harmonic generator on-board for truly deep bass
    • On-board compressor
    • Balanced DI output
    • 1 x 12 inch driver configuration


    The EB LITE 12-220 1 x 12 inch combo uses a 220 Watts RMS fan-cooled fast-transient power stage, and a fully-featured bass pre amp with inputs for both active and passive instruments, an illuminated VU meter, 5 band EQ with Bright and Deep switches for total tonal control, a front panel-mounted balanced DI output for connection to a PA or recording console, an FX loop, a tuner/line output and the classic Ashdown sub-harmonic generator.

    Read More


    Consistent with its EVO III status, the combo also includes a built-in compressor to provide an exceptional level of sonic control for a bass amp of this size and cost.
    A high-performance Ashdown 'Blueline' speaker ensures exceptional attack, clarity and low-end performance. The cabinet is finished in a tough, retro-style vinyl covering with metal protected corners.

    EB-LITE- 12-220 EVO III Specifications
    Power Output (RMS): 220W
    Speaker Configuration: 1 x 12
    Frequency Response: -3dB at 33Hz and 25KHz
    High Instrument Input: Impedance 3.9MOhms / Input range 150mV - 20V p-p
    Low Instrument Input: Impedance 10KOhms / Input range 300mV - 40V p-p
    Line Input: Impedance 22k Ohms / Input level 0dBu nominal
    DI Output: 600 Ohms balanced / Level -20dBu nominal
    Tuner Output: Impedance 22k Ohms, level 0dBu nominal
    Impedance: 8 ohm
    Output Impedance: Minimum 4 ohm
    Signal to noise: Better than 80dB (EQ flat)
    EQ: Bass +/-15dB @ 100Hz Lo Mid +/-15dB @ 220Hz Middle +/-15dB @ 660Hz Hi Mid +/-15dB @ 1.6kHz Treble +/-15dB @ 7kHz shelving Deep +
    Effects Send: Impedance 22k Ohms / Level 0dBu nominal
    Effects Return: Impedance 22k Ohms / Level 0dBu nominal
    Distortion: Less than 0.5% THD
    Dimensions (H x W x D): 501 x 474 x 300 mm
    Weight: 23 Kgs

  • Sorry - this product is not available to purchase
  • 2 Recommended Accessories

  • Additional Information

    On demo in store No
    Brand Ashdown
    Condition Ex-display
    Amp Use Bass
    Amp Type Combo
    Power 201-300W
    Specifications
    Power Output (RMS): 220W
    Speaker Configuration: 1 x 12
    Frequency Response: -3dB at 33Hz and 25KHz
    High Instrument Input: Impedance 3.9MOhms / Input range 150mV - 20V p-p
    Low Instrument Input: Impedance 10KOhms / Input range 300mV - 40V p-p
    Line Input: Impedance 22k Ohms / Input level 0dBu nominal
    DI Output: 600 Ohms balanced / Level -20dBu nominal
    Tuner Output: Impedance 22k Ohms, level 0dBu nominal
    Impedance: 8 ohm
    Output Impedance: Minimum 4 ohm
    Signal to noise: Better than 80dB (EQ flat)
    EQ: Bass +/-15dB @ 100Hz Lo Mid +/-15dB @ 220Hz Middle +/-15dB @ 660Hz Hi Mid +/-15dB @ 1.6kHz Treble +/-15dB @ 7kHz shelving Deep +
    Effects Send: Impedance 22k Ohms / Level 0dBu nominal
    Effects Return: Impedance 22k Ohms / Level 0dBu nominal
    Distortion: Less than 0.5% THD
    Dimensions (H x W x D): 501 x 474 x 300 mm
    Weight: 23 Kgs