Ashdown ABM 500 EVO III Bass Head, 575 Watt  (ex-display, no box)

Ashdown ABM 500 EVO III Bass Head, 575 Watt (ex-display, no box)

Product code: bstasdabm500evoiii

The Ashdown ABM 500 EVO III is a 575 watts RMS bass amp head designed to satisfy both bass-purists and tech-heads alike. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out by a footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting.


  • Ashdown ABM 500 EVO III Bass Head, 575 Watt (ex-display, no box)

    Main Features

    • Ex-Display Item
    • Very tidy condition
    • No box or manual included


    The Ashdown ABM 500 EVO III is a 575 watts RMS bass amp head designed to satisfy both bass-purists and tech-heads alike. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out by a footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones.

    Read More


    Also footswitchable is the on-board compressor and the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone. The ABM 500 EVO III features a front-panel mounted balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. A new upgraded power section has faster transient attack, more headroom and even less noise.
    Ashdown ABM 500 EVO III Specifications
    • Power Output (RMS): 575W
    • Frequency Response: -3dB at 17Hz and 30kHz
    • Speaker Output Connectors: 2 x Jack/Speakon outputs
    • Speaker Outputs: Minimum impedance 4 Ohms
    • Line Level, High and Low impedance Instrument Inputs
    • Sub and DI Outputs
    • Tuner Output
    • Effects send and return loop
    • Pre-Amp Tubes: 1 x 12AX7
    • Dimensions (H x W x D): 134 x 474 x 315 mm
    • Weight: 14 Kgs

  • Sorry - this product is not available to purchase
  • Additional Information

    On demo in store No
    Brand Ashdown
    Condition Ex-display
    Amp Use Bass
    Amp Type Head
    Power 501-1000W
    Specifications

    • Power Output (RMS): 575W

    • Frequency Response: -3dB at 17Hz and 30kHz

    • Speaker Output Connectors: 2 x Jack/Speakon outputs

    • Speaker Outputs: Minimum impedance 4 Ohms

    • Line Level, High and Low impedance Instrument Inputs

    • Sub and DI Outputs

    • Tuner Output

    • Effects send and return loop

    • Pre-Amp Tubes: 1 x 12AX7

    • Dimensions (H x W x D): 134 x 474 x 315 mm

    • Weight: 14 Kgs

FeeFo Reviews

This product has no reviews yet.