Ampeg B410HLF 4x10 bass cab w/Horn - 400 watt - ported  (ex-display)

Ampeg B410HLF 4x10 bass cab w/Horn - 400 watt - ported (ex-display)

Product code: bstapgb410hlf

With its four specially designed 10 inch speakers, 1 inch horn, and dual front ports for extended low end, the Ampeg B-410HLF was born to rock hard and low. Suitable for most sizes of venues, the 4-Ohm enclosure handles twice the power of the B-410HE and features heavy-duty recessed handles and detachable casters.


  • Ampeg B410HLF 4x10 bass cab w/Horn - 400 watt - ported (ex-display)


    With its four specially designed 10 inch speakers, 1 inch horn, and dual front ports for extended low end, the Ampeg B-410HLF was born to rock hard and low. Suitable for most sizes of venues, the 4-Ohm enclosure handles twice the power of the B-410HE and features heavy-duty recessed handles and detachable casters. The extended range of the B-410HLF makes it ideal for 5- or 6-string bass players seeking solid low frequency performance (all the way down to 40Hz), with shimmering top-end up to 18kHz.

    Read More



    The rear jackplate features two 1/4 inch jacks wired in parallel, allowing for easy daisy-chaining from one speaker to another. Either jack can be used as an input or a through connection. The 3-position HF Horn switch allows for full high frequency output (0 setting), -6dB reduction of the highs (-6 setting), and Horn shutoff (off setting).

    Features

    • Full-Range, Two-Way Enclosure
    • Baltic Birch Plywood
    • 3-Position HF Switch

    Specifications

    • LF Drivers: 4 x 10 inch Special Design Speakers
    • Voice Coil: 3 inch
    • Magnet Weight: 30 oz
    • HF Driver: Horn/Driver
    • Voice Coil: 1 inch
    • Magnet Weight: 8 oz
    • RMS Power Handling: 400-Watts
    • Frequency Response (-3dB): 50Hz-18kHz
    • Usable Low Frequency (-10dB): 40Hz
    • Crossover Frequency: 4kHz
    • Nominal Impedance: 4-Ohms
    • Sensitivity: 99dB
    • Maximum SPL: 125dB
    • Dimensions (W x H x D inches): 22.75 x 25.75 x 17.5
    • Weight: 88 Pounds

  • Sorry - this product is not available to purchase
  • Additional Information

    On demo in store No
    Brand Ampeg
    Condition Ex-display
    Amp Use Bass
    Specifications

    • LF Drivers: 4 x 10 inch Special Design Speakers

    • Voice Coil: 3 inch

    • Magnet Weight: 30 oz

    • HF Driver: Horn/Driver

    • Voice Coil: 1 inch

    • Magnet Weight: 8 oz

    • RMS Power Handling: 400-Watts

    • Frequency Response (-3dB): 50Hz-18kHz

    • Usable Low Frequency (-10dB): 40Hz

    • Crossover Frequency: 4kHz

    • Nominal Impedance: 4-Ohms

    • Sensitivity: 99dB

    • Maximum SPL: 125dB

    • Dimensions (W x H x D inches): 22.75 x 25.75 x 17.5

    • Weight: 88 Pounds

FeeFo Reviews

This product has no reviews yet.