Alto ZMX862 and TS110A PA System Bundle

Alto ZMX862 and TS110A PA System Bundle

Product code: altzmx862ts110bun

Portable and lightweight PA system including an 8 channel mixer and a pair of 10 inch active PA speakers plus speaker stands.

  • Alto ZMX862 and TS110A PA System Bundle

    Portable and lightweight PA system including an 8 channel mixer and a pair of 10 inch active PA speakers plus speaker stands.

    Main Features

    • Ideal for rehearsals and smaller gigs
    • 6 channel mixer
    • 600 watt (continuous) total output power
    • Stands and cables included

    Package consists of:

    • 1 x Alto ZEPHYR ZMX862 6 Channel Compact Mixer
    • 2 x Alto TRUESONIC TS110A Active PA Speaker
    • 1 x Stagg SPSQ10 Set Pair of Steel Speaker Stands with bag
    • 2 x Lynx MEL10CB 10 metre XLR to XLR Microphone Cable

    Read More

    Alto TRUESONIC TS110A Active PA Speaker

    The Alto TRUESONIC TS110A is an active 600 Watt 2-way PA speaker with a 10 inch low frequency driver. The TS110A is designed to be versatile, so whatever you are using it for, wherever you are using it and however you are using it, you can be confident that the TS110A will perform. As well as being stand mountable and flyable, the TS110A also features a contour EQ switch to tune it to different environments, which helps add to its flexibility as a loudspeaker solution.
    Versatile Cabinet Design
    The Alto TRUESONIC TS110A 2-way speaker cabinet has been designed with versatility and longevity in mind. The TS110A features a durable, lightweight polypropylene enclosure that is stand mountable for weekend gigs and flyable for more permanent installations. What's more, they have a trapezoidal design which greatly decreases the resonance of the standing wave in the cabinet for a more true and exact sound reproduction. The TRUESONIC TS110A is the perfect solution for musicians and DJs on the move and halls, malls, and houses of worship alike.

    Total Transparency
    The TRUESONIC Series was designed from the ground up to be the most transparent loudspeaker money can buy. Rigorous testing and thousands of hours of listening have gone into making sure that what you pump into a TRUESONIC speaker is exactly what you get out. Everything you see (and some things you don't) – from internal signal path and components used to the sculpted cabinet and meticulously designed waveguide – was developed in service of the principle of accurate, transparent sound.

    Super Efficient Drivers
    The drivers in the TRUESONIC TS110A are designed to make sure that virtually no energy is wasted. That translates to more of the power from the amplifier actually working to generate sound rather than heat, giving the speaker better real world performance than other speakers with comparable published specifications. The TRUESONIC TS110A features a 10 inch LF driver (1.5 inch voice coil) and a 1 inch HF driver (Neodymium Driver).

    Modern Amplifier Design
    The Alto TRUESONIC TS110A speaker benefits from the use of a Class D amplifier integrated into the cabinet. Class D amps are generally lighter than Class A and AB amplifier designs, and offer more than enough power to provide your performance with plenty of punch. The TRUESONIC TS110A delivers with 600 Watts of power (470 W LF + 130 W HF) and offers a balanced combo jack (XLR/TRS) input.

    Hang 'em High
    Optimal speaker placement can be challenging, especially if your speakers don't have what it takes to go anywhere. Whether you need to fly your speakers, pole mount or use them as floor monitors, TRUESONIC speakers are ready for you. All TRUESONIC speakers feature standard 36mm pole mounting insets on the bottom. If you need to fly them, it's no problem. The TRUESONIC TS110A comes from the factory with four M10 rigging points. Use them anywhere you need them.

    Just What You Need
    Whether you're performing at a coffee house, wedding, house of worship or other small to medium-sized venue, the TRUESONIC TS110A is ideal. For example, it's easy to get your TRUESONIC speakers to the gig thanks to their carrying handle and lightweight design. Once you're there you won't need to be a live sound engineer to figure out how to EQ the speakers thanks to the built-in Contour EQ. When you're connecting everything, the TRUESONIC TS110A's dual XLR/combo inputs make easy work of your setup and each speaker's independent level controls give you the flexibility to dial everything in your way in seconds.

    Full Metal Grille
    You can never be too safe around the stage. Alto know stuff happens that you just can't predict. Sometimes it's the flying drumstick, a falling mic stand or worse. The TRUESONIC TS110A comes with a complete front grille from top to bottom that protects not only your low frequency driver, but your high frequency driver as well. With TRUESONIC speakers, you get extra peace of mind knowing that whatever comes at your sound system, they've got it covered, literally.

    Alto TRUESONIC TS110A Specifications

    Transducer Low: 10 inch Woofer with 1.5 inch voice coil
    Transducer High: Neodymium compression driver, 1 inch exit with 1 inch voice coil
    Power Amplification: 600 Watts peak, 300 Watts continuous
    Frequency Range: (-10 dB): 53 Hz - 20 kHz
    Frequency Response: (±3 dB): 70 Hz - 19 kHz
    Maximum SPL at 1m: 123 dB peak, 120 dB continuous
    Dimensions: 20.2 x 12.99 x 11.73 inches
    Weight: 26.6 lbs.

    Alto ZEPHYR ZMX862 6 Channel Compact Mixer

    The ZEPHYR ZMX862 is an 6-channel, 2-bus mixer with the right amount of inputs, outputs, routing, and EQ for more intimate live performance reinforcement situations. It features two microphone inputs (with Phantom Power) with balanced TRS jacks, a three-band EQ and two AUX sends on each of the two mono channels and the two stereo channels, and even two-track inputs for things such as audio playback. The ZMX862 is the perfect compact take-anywhere professional mixer.

    Versatile Inputs and Outputs
    The ZMX862 is a step up from Alto's ZMX52 that adds more inputs and an extra band of EQ as well as a switch for phantom power. Not only can you can plug dynamic, condenser, and wireless microphones into the first two channels, but you also get two stereo channel inputs for keyboards, drum machines, and other instruments. What's more, you can easily plug in your MP3 player, CD players, or audio from a DVD player into the CD/TAPE inputs. But, you also have two AUX sends that you can use to send streams of audio from your mixer to a digital effects unit, stage monitor, TV screen, or any number of sources. Choose the ZMX862 as the audio central command for your live performances, home studio, or video suite.

    High headroom, low noise
    Just because the ZMX862 is compact, portable and affordable doesn't mean you have to make sacrifices. This compact mixer brings the same standard of quality to your performances as Alto's top-of-the-line models. All Alto Professional ZEPHYR ZMX mixers are designed with high headroom and ultra low-noise, discrete mic preamps so you always get the full dynamic range of your mix every time.

    Visualise your mix
    Alto designed every ZEPHYR ZMX mixer with your performance in mind. Sometimes venues are dark and it can be hard to see what you're working with. Alto Professional solves this problem by not only colour coding each section of the mixer, but also by using brightly coloured knobs so that you can easily find what you need to adjust before you ever lay a finger on the mixer. Our blue, red, yellow and white pots are instantly easy to identify in dim lighting. LED indicators for output level, peak, and phantom power also assist in making sure that you have multiple visual cues that compliment everything you're hearing.

    Stagg SPSQ10 Set Pair of Steel Speaker Stands with bag

    The Stagg SPSQ10 Set includes a pair of heavy duty speaker stands and a durable carry bag with internal divider and straps.
    Stagg SPSQ10 Specifications

    Standard top mount (3 5mm / 1-3/8 inch)
    Height: 113 - 187 cm (44.5 - 73.5 inch)
    Maximum load: 60kg / 132lbs
    Weight: 3.25kg / 7.16lbs per stand
    Colour: Black

    Lynx MEL10CB 10 metre XLR to XLR Microphone Cable

    Lynx MEL10CB 10 metre XLR to XLR mic cable

    Quality microphone cable
    10 metres long
    XLR connectors (male to female)

  • Sorry - this product is not available to purchase
  • Additional Information

    Brand Alto
    Condition New
    Power 201-300W

FeeFo Reviews

This product has no reviews yet.