* SPECIAL OFFER * ADAM A7X Studio Monitoring Bundle
The Adam A7x studio monitoring bundle is the ideal solution for project and professional studio monitoring, featuring ADAM's best selling monitors in the AX range, the ADAM A7X, plus a pair of Isoacoustics sound isolating desktop speaker stands that ensure you get the most out of your monitor setup.
- X-ART ribbon tweeter technology for extended frequency response
- 7 Inch carbon fibre LF driver
- 300 watts total
- Isoacoustics acoustic isolating monitor stands
- Read More
Package consists of:
• 2 x ADAM A7X active studio monitors
• 1 x IsoAcoustics ISO-L8R155 Desktop Monitor Stands (Pair)
• 2 x 3 metre balanced jack to Male XLR cable
ADAM A7X active studio monitors
The predecessor to the Adam A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the world's largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.
With the Adam A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.
The first aspect that distiguishes the old from the new model is the X-ART tweeter. The 'X' stands for 'eXtended frequency response' and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.
The perfect integration with the lower frequencies has been achieved with a newly designed 7 inch midwoofer. It has been redesigned with a much bigger voice coil (1.5 inch) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Adam A7X Specifications
• Woofer Amp. power RMS / music: 100 W / 150 W
• Tweeter Amp. power RMS / music: 50 W / 75 W
• Input connectors: XLR / RCA
• Frequency response: 42 Hz - 50 kHz
• Weight: 20.3 lb (9,2 kg)
• Dimensions: 13.5 x 8 x 11 inches / 337 x 201 x 280 mm
IsoAcoustics ISO-L8R155 Desktop Monitor Stands (Pair)
IsoAcoustic's unique patented design provides superior audio performance by supporting the PIF Principles in acoustic design.
Placement – proximity to adjacent and nearby surfaces. ISO-L8R155 audio stands raise the audio speakers or studio monitors off the supporting surface and away from adjacent surfaces to reduce reflections.
Isolation – from supporting surfaces. Decoupling the audio speakers or studio monitors from the supporting surface reduces the energy from exciting other objects, and allows the speaker and enclosure to float independently.
Focus – Raising and tilting the audio speakers and studio monitors creates an ideal listening position by forming an equilateral triangle from the speaker to the listener, with tweeters tilted to the listener's exact ear level.
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimise its position relative to the listener. Two lengths of tubing along with 2 sets of end-plug pairs provide 14 steps of height adjustment as the combinations are used to tilt the speaker up and down. The stand can be assembled and reconfigured repeatedly to establish the ideal position off the supporting surface and focused towards the listener.
In a typical Desktop Audio Workstation configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20 inches above the work surface. An enclosure containing an 8 inch speaker may position the high frequency driver 12 inches from the bottom while an enclosure with a 6 inch speaker may position the high frequency driver only 8 inches from the bottom. Raising and tilting these examples to their optimum position can easily be achieved with this speaker stand design. The ISO-L8R155 configuration is also suited for applications over longer distances such as in large recording studios or with consumer products where home stereo speakers may ideally need to be raised 6 inches off the floor and tilted up 8 degrees.
Numerous combinations of height and tilt adjustment allow ideal listening position.
IsoAcoustics ISO-L8R155 Specifications
Base Dimensions: 6.1 x 7.5 inches