* SPECIAL OFFER * ADAM A7X Pair and Sub 8 Bundle
2.1 monitoring solution including a pair of Adam A7X 7 inch studio monitors and 8 inch Adam subwoofer plus all cables and Mopad acoustic isolation pads.
- 7 inch drivers
- Proprietary X-ART ribbon tweeters
- 8 inch subwoofer
- Cables and isolation pads included
Package consists of:
• 2 x ADAM A7X Active Studio Monitor (Single)
• 1 x ADAM SUB8 active studio subwoofer
• 2 x Lynx PRL2M 2 metre balanced jack to Male XLR cable
• 1 x Auralex MoPADs studio monitor isolation pads
• 2 x Lynx MEL2C 2 metre male XLR to female XLR cable
- Read More
ADAM SUB8 active studio subwoofer
The ADAM Sub8 houses an excellent 8 inch woofer with a large 50mm voicecoil, and is driven by a 160W ICE Power amp. This amp stays cool while handling maximum power levels even if they are sustained.
The front baffle features two motorised knobs that let you tailor input level and crossover frequency settings for the best performance in your studio. These knobs can be controlled with an included wireless remote, allowing you to optimise your sound reproduction from your ideal listening position.
The Sub8 is an ideal match for ADAM monitors such as the A7, ANF10, P11A, S1A and S2A.
ADAM Sub8 Specifications
Active bass reflex speaker
Woofer: 215 mm (8 inch), coated paper
Frequency response (± 3dB): 28Hz-150Hz
Crossover frequency: 50 - 150Hz
Frequency response sat. (switchable): 85Hz
Variable Input gain: -40 - +12dB
Power: 160W / 240W
Inputs: Balanced XLR
Dimensions (W x H x D): 260 x 410 x 380 mm / 10.2 x 16.1 x 14.9 inches
Weight: 12 kg / 26.4 lbs.
ADAM A7X Active Studio Monitor (Single)
The predecessor to the Adam A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.
The first aspect that distinguishes the old from the new model is the X-ART tweeter. The 'X' stands for 'eXtended frequency response' which highlights one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter is more efficient and produces higher maximum sound pressure levels.
Perfect integration with the lower frequencies has been achieved with a newly designed 7 inch midwoofer. This has been redesigned with a much bigger voice coil (1.5 inch) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces amazing sound and pressure levels with an almost distortion-free musical reproduction.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Adam A7X Specifications
Woofer Amp. power RMS / music: 100 W / 150 W
Tweeter Amp. power RMS / music: 50 W / 75 W
Input connectors: Balanced XLR / Unbalanced RCA
Frequency response: 42 Hz - 50 kHz
Weight: 9.2 Kgs / 20.3 lbs.
Dimensions: 337 x 201 x 280 mm / 13.5 x 8 x 11 inches
Auralex MoPADs studio monitor isolation pads
Auralex MoPADs isolate your monitors from the surface on which they stand, which instantly improves the accuracy of your mixes by reducing unwanted acoustic artifacts and surface vibrations. MoPADs are affordable and easy to implement, and a must have for all studios, especially those with speakers placed on desktops! After all, what's the point in having expensive speakers if you aren't getting the best out of them? This pack contains enough pads for use with one pair of studio speakers.
Lynx PRL2M 2 metre balanced jack to Male XLR cable
A range of leads from LYNX which are manufactured to the highest standard,using professional quality connectors and flexible oxygen free cable. These cables offer excellent value for money and are designed to withstand the demands of professional musicians.
6.3mm stereo jack plug to male XLR
Length: 2 metre
A Professional quality, male XLR connector,it has a metal body and a plastic/rubber screw on cap,with a unique clamping system to ensure robust performance both in live and studio use. Finished in a black anodised coating and fitted with a locking system (when the end cap is screwed down it compresses the clamp to secure the cable).
A professional quality metal 6.3mm stereo jack plug, the cable is secured by a plastic clamp which is compressed when the strain relief cap is screwed down. Finished in a black anodised coating.
Lynx MEL2C 2 metre male XLR to female XLR cable
A professional quality lead for the most demanding live and recording situations, where the quality of the audio signal is the upmost importance.
This range of signal cables are manufactured using professional quality twisted pair,screened OFC cable and are terminated with industry standard,Neutrik connector on both ends.
- This product is on order with our suppliers
This item is normally sent to Mainland UK addresses by Interlink who generally provide a one-hour window of delivery on the morning of delivery by email or text message. If you need this item faster, please upgrade to a Before 12 service at checkout.
FREE delivery within mainland UK
UK Non-Mainland: £ 12
Rep. of Ireland and Mainland Europe: from £ 15 (calculated at checkout) International orders over £250 are delivered FREE except for large or heavy items. Please see our international delivery page or contact us for details.
1 Recommended Accessory
Brand Adam Condition New Power 501-1000W
Other products to consider
|This product has no reviews yet.|