* SPECIAL OFFER * ADAM A77X and Sub10 Mk2 Monitoring System
Complete monitoring solution featuring twin 7 inch driver ADAM A77X monitors plus a Sub10 Mk2 subwoofer. The ideal professional system for full range studio monitoring. Includes IsoAcoustics sound isolating speaker stands and all necessary cables.
- X-ART ribbon tweeter technology for extended frequency response
- Twin 7 Inch carbon fibre MF/LF drivers
- Horizontal design
- 10 inch subwoofer extending to 25Hz
- Two sets of Isoacoustics acoustic isolating monitor stands
- Read More
Package consists of:
• 1 x ADAM A77X Active Studio Monitor (Speaker A)
• 1 x ADAM A77X Active Studio Monitor (Speaker B)
• 1 x ADAM Sub10 Mk2 Active Subwoofer
• 2 x IsoAcoustics ISO-L8R155 Desktop Monitor Stands (Pair)
• 2 x 3 metre balanced jack to Male XLR cable
• 2 x 3 metre XLR to XLR microphone cable
ADAM A77X ACTIVE STUDIO MONITORS
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new ADAM A77X, due to its outstanding features, might become a true game changer. Equipped with the same advanced technologies as the A7X, it is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The 'X' stands for 'eXtended frequency response' and that is one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7 inch woofers are identical with that of the A7X. With their large voice coils (1.5 inch) and powerful amplifiers they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while one of them is responsible for the (sub-) bass frequencies up to about 400Hz, the other takes over most of the midrange.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
ADAM A77X Specifications
• LF Driver: 7 inch with 1.5 inch Voice coil (x 2)
• HF Driver: X-ART Ribbon
• Amplifers: 2 x LF 100W RMS / HF 50W RMS
• Connectors: XLR balanced / RCA unbalanced
• Frequency Response: 38 Hz - 50 kHz
• Crossover frequencies: 400 / 3000 Hz
• Weight: 28.2 lb / 12.8 kg (each)
• Dimensions (H x W x D): 235 x 530 x 280 / 9.5 x 21 x 11 inches (each
ADAM Sub10 Mk2 Active Subwoofer
The ADAM Audio Sub10 Mk2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring and are ideal matches for ADAM monitors such as the AX- or the SX-Series.
A large (2 inch) voice coil is driven by a 200W Ice Power amp. This amp stays cool as it uses PWM technology in the amp and the power supply sections, producing > 90% overall efficiency, and can handle its maximum power without danger to the electronics or the driver. The SUB10 Mk2 houses a 10 inch woofer, capable of a frequency response of 25Hz - 150Hz.
The SUB10 Mk2 has a level control that varies from -60dB to +6dB, a phase ±180° switch and variable upper frequency barrier control (50-150Hz), a switchable 85Hz high pass filter for the satellite output. In addition, there is a 'signal-on/continuous' switch. This provides the option of automatic power up whenever the subwoofer receives a signal and automatic power off after 15 minutes of no signal.
The SUB10 Mk2 works with a new down-firing bass reflex tube that, due to its shape and size, avoids unnecessary ventilation noise. For larger rooms or higher levels it is possible to chain as many ADAM Subs together as necessary. All inputs and outputs have both XLR and RCA connectors.
ADAM SUB10 Mk2 Specifications
• Woofer: 260mm (10 inch), coated paper
• Frequency response (± 3dB): 25Hz - 150Hz, variable.
• Power: 200W (sin), 300W (RMS)
• Inputs: Balanced XLR / Unbalanced RCA
• Dimensions (W x H x D): 300 x 550 x 400 mm / 11.8 x 21.6 x 15.7 inches
• Weight: 21 kg / 46 lb.
IsoAcoustics ISO-L8R155 Desktop Monitor Stands (Pair)
IsoAcoustic's unique patented design provides superior audio performance by supporting the PIF Principles in acoustic design.
Placement – proximity to adjacent and nearby surfaces. ISO-L8R155 audio stands raise the audio speakers or studio monitors off the supporting surface and away from adjacent surfaces to reduce reflections.
Isolation – from supporting surfaces. Decoupling the audio speakers or studio monitors from the supporting surface reduces the energy from exciting other objects, and allows the speaker and enclosure to float independently.
Focus – Raising and tilting the audio speakers and studio monitors creates an ideal listening position by forming an equilateral triangle from the speaker to the listener, with tweeters tilted to the listener's exact ear level.
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimise its position relative to the listener. Two lengths of tubing along with 2 sets of end-plug pairs provide 14 steps of height adjustment as the combinations are used to tilt the speaker up and down. The stand can be assembled and reconfigured repeatedly to establish the ideal position off the supporting surface and focused towards the listener.
In a typical Desktop Audio Workstation configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20 inches above the work surface. An enclosure containing an 8 inch speaker may position the high frequency driver 12 inches from the bottom while an enclosure with a 6 inch speaker may position the high frequency driver only 8 inches from the bottom. Raising and tilting these examples to their optimum position can easily be achieved with this speaker stand design. The ISO-L8R155 configuration is also suited for applications over longer distances such as in large recording studios or with consumer products where home stereo speakers may ideally need to be raised 6 inches off the floor and tilted up 8 degrees.
Numerous combinations of height and tilt adjustment allow ideal listening position.
Ideal for: Adam A5X, Adam A7X, Adam S1X, Alesis M1 Active 520, Alesis M1 Active 620, Alesis Monitor One mkII, Behringer MS40, JBL LSR2325P, KRK Rokit 5, KRK Rokit 6, KRK R6, KRK VXT 6, M-Audio BX5a, M-Audio DSM1, M-Audio CX5, M-Audio EX66, Mackie MR5, Samson Resolv A5, Samson Resolv A6, Samson MediaOne 4a, Samson MediaOne 5a, Samson GT, Yamaha HS50M, Yamaha MSP7, Yamaha MSP5, Yorkville YSM2P-II, Yorkville YSM5, Yorkville YSM6 montiors, and many more.
IsoAcoustics ISO-L8R155 Specifications
Base Dimensions: 6.1 x 7.5 inches