The Dynaudio BM 9S Subwoofer is intended to operate with the BM series monitors, more specifically, the BM 5A monitor although it will happily work well with other similarly sized monitors. It is extremely well-suited for adding that extra punch to the bottom end in setups where space is limited. The BM 9S sports a 10 inch driver coupled to a 200W amplifier which delivers a clear, crispy and surprisingly powerful punch when you take its almost diminutive size into account. The BM 9S will complement stereo and multichannel monitoring equally well and when daisy-chaining of subwoofers is needed, it sports a low level LFE input/output.

Dynaudio BM 9S Features

• 10 inch woofer
• Phase adjustment in 0° / 180°
• Auto on/off, power LED
• Mode selection, LFE or slave
• Adjustment of low-pass corner frequencies (50-150Hz)
• SAT/SUB high-pass adjustment, Flat, 60 Hz, 80 Hz
• Small dimensions: 294 x 289 x 318 mm / 11.6 X 11.4 X 12.5 inches
• 200 W @ 4 Ohms
• Discrete LFE input, slave output for linking
• Closed cabinet for extremely precise low frequency reproduction

For significant control and enhancement of the general performance, the BM 9S is a closed cabinet type. This creates an internal pressure by which the woofer gains a considerable amount of precision when it comes to the reproduction of low frequent signals. This precision is easily audible and it augments the feeling of reality that the listener experiences.

The Auto On/Off function, provides a minimised idle energy usage by shutting off after minutes of no input signal. The auto sensing circuit enables BM9S to automatically come to life when input signal is detected.

The satellite filters provide high-pass filtering of the monitor source signal allowing 60Hz or 80Hz corner frequencies. This is a huge advantage for the monitor performance, as the satellites do not need to deal with power consuming lower frequencies. This leaves all the satellite power to greatly accelerate performance and precision.

Dynaudio BM 9S Specifications

• Frequency Response (+/- 3 dB): 29 Hz - 250 Hz
• Amplifier Power: 200 W @ 4 Ohm
• Crossover Frequencies HP Sat: Flat / 60 Hz / 80 Hz
• Input/Outputs: Balanced/XLR
• Driver: 10 inch long throw
• Dimensions (W x H x D): 294 x 289 x 318 mm / 11.6 x 11.4 x 12.5 inches
• Weight: 10 kg / 22 lbs
  

This item is normally sent to Mainland UK addresses by DPD courier. If you need this item faster, please upgrade to a Before 12 service at checkout.

Mainland UK: FREE within mainland UK

UK Non-Mainland: £ 12

Rep. of Ireland: £ 20.00

Mainland Europe: from £ 15 (calculated at checkout)

*Please note that this is an indication of stock levels only and is subject to change. Please contact us if you need further details.

Click here for more information on shipping.