The DPA 4091 is a high quality omnidirectional condenser microphone. Due to its uniquely natural and open sound, the 4091 is suitable for instrument miking applications in the studio or on the stage.

The 144 dB SPL handling means it can meet just about any challenge including miking an electric guitar amp. An excellent microphone for percussion instruments, the 4091 is also an ideal choice for wind and string instruments. Due to their remarkably linear frequency response in the 20 Hz to 20 kHz range, sound system engineers can also use these mics for sound system alignment, testing and tuning.

The rugged and compact design features a 5.4 mm diameter pre-polarized condenser capsule in a tapered body measuring just 12 cm (4,76 in).

Specifications:

Principle of operation:
Pressure
Cartridge type:
Pre-polarized condenser
Power supply:
48 V Phantom power
Frequency range, ± 2 dB:
20 Hz - 20 kHz
Directional characteristics:
Omnidirectional
Equivalent noise level A-weighted:
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Total harmonic distortion (THD):
<1% up to 123 dB SPL peak
Output impedance:
<40 Ohm
Cable drive capability:
Up to 300 m (984 ft)
Max. SPL, peak before clipping:
144 dB
Dynamic Range:
Typ. 97 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
68 dB(A)
Connector:
3-pin XLR (Standard P48)
Sensitivity, nominal, ±3 dB:
6 mV/Pa: -44.5 dB re. 1 V/Pa

This item is normally sent to Mainland UK addresses by DPD courier. If you need this item faster, please upgrade to a Before 12 service at checkout.

Mainland UK: FREE within mainland UK

UK Non-Mainland: £ 12

Rep. of Ireland: £

Mainland Europe: from £ 15 (calculated at checkout)

*Please note that this is an indication of stock levels only and is subject to change. Please contact us if you need further details.

Click here for more information on shipping.