Rode NTG4+ Shotgun Microphone

Main Features

• Broadcast sound quality
• Low noise circuitry
• Internal rechargeable lithium battery, supplying over 150 hours operation
• Fully charged in under two hours via Micro USB (cable included)
• Convenient digital switching
• High Frequency Boost
• High Pass Filter (Flat/75Hz)

The Rode NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.


Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching.

Intuitive Digital Switching
Control the in-built high-pass filter, pad and high frequency boost using convenient digital switching on the microphone body. Persistent states ensure your settings are retained when the microphone is switched off.

Internal Battery
Provides 150+ hours of operation from with a charge time of only two hours. The included MicroUSB cable makes charging simple and convenient, meaning the mic can be charged via a computer, power-brick or even your car.

Super Low-Noise
The NTG4+ features an all-new condenser capsule from RØDE with low noise floor, higher sensitivity and a rich, smooth character.


Rode NTG4+ Specifications

Acoustic Principle: Line Gradient
Capsule: 0.50 inch
Polar Pattern: Supercardioid
Address Type: End
Frequency Range: 20Hz - 20kHz(selected HPF @75Hz)
Output Impedance: 200 ohms
Maximum SPL: 135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 16dB-A
Power Options: +12V phantom power, +24V phantom power, +48V phantom power, built-in rechargeable battery
Weight: 176gm
Dimensions (H x W x D): 278 x 22 x 22 mm
Output: XLR Output